Product Description
Bell & Gossett Volute Gasket – Part No. P48690
Genuine Bell & Gossett replacement volute gasket, B&G part number P48690, for Series e-1510, e-1531, e-1532, e-80 pumps. This is the part shown as item 11 on B&G parts list CP-208H-PL R6 (highlighted on the drawing above).
Fits these Bell & Gossett pumps
- Series e-1510 (end suction, base mounted) – pump sizes 1.25BC, 1.5BC, 2BD, 2.5BB, 3BD, 4BD, 5BD, 6BD
- Shaft sleeve at seal: 1.625" large bore
- Series e-1531 (close coupled end suction) – pump sizes 1.25BC, 1.5BC, 2BD, 2.5BB, 3BD, 4BD, 5BD, 6BD
- Series e-1532 (close coupled end suction) – pump sizes 1.25BC, 1.5BC, 2BD, 2.5BB, 3BD, 4BD, 5BD, 6BD
- Series e-80 (vertical in-line) – pump sizes 1.5x1.5x9.5B, 2x2x9.5C, 2.5x2.5x9.5C, 3x3x9.5C, 4x4x9.5B, 5x5x9.5B, 6x6x9.5B, 8x8x9.5B
Other parts for this pump
Rebuilding a Series e-1510 1.25BC? These parts are often replaced at the same time:
| Item | Part | B&G part no. |
|---|---|---|
| 2 | Complete Bearing Frame Assembly | 185014LF |
| 3 | Volute Capscrew | P03470 |
| 4 | Seal Kit BUNA / Carbon vs Ceramic | 186543LF |
| 4 | Seal Kit EPR / Carbon vs Tungsten Carbide | 185225LF |
| 4 | Seal Kit FKM / Carbon vs Ceramic | P77046 |
| 4 | Seal Kit EPR / Silicon Carbide vs Silicon Carbide | P75424 |
| 5 | Impeller 9.5" Full Diameter – Trimmed to Order | P2001009 |
| 6 | Impeller Washer | P51230 |
| 7 | Impeller Capscrew | P13800 |
| 8 | Volute (175 MWP) | P41620 |
| 8 | Volute (175 MWP) with Stainless Steel Wear Ring | P2001189 |
| 8 | Volute Drain Plug | P39020 |
| 9 | Impeller Lockwasher | J23875 |
| 10 | Impeller Key | P49372 |
| 12 | Volute Coverplate | P51540 |
| 12 | Volute Coverplate – "-F" Construction | P51541 |
| 13 | Water Slinger | P53720 |
| 14 | Coupling Key | P49373 |
| 17 | Bearing Frame | P2001127 |
| 18 | Spring Washer | J92560 |
| 19 | Shaft | P79027 |
| 20 | Bearing Cap | P75612 |
| 21 | Bearing Cap Capscrew | DJ0066 |
| 22 | Stainless Steel Shaft Sleeve Kit | 185143 |
Showing 24 of 28 parts – see the full list in the parts finder.
Not sure this is the right part?
Use our Bell & Gossett Pump Parts Finder: choose Series e-1510 and your pump size to see every part highlighted on the exploded drawing. Or send us your pump's nameplate details – call (416) 236-2338 or email sales@bramhambros.com. Bramham Bros is an authorized Bell & Gossett dealer.
Product Videos
Custom Field
Brand Bell & Gossett
B&G Part Number P48690
Part Type Gasket / O-Ring
Fits Series e-1510 1.25BC, 1.5BC, 2BD, 2.5BB, 3BD, 4BD, 5BD, 6BD
Fits Series e-1531 1.25BC, 1.5BC, 2BD, 2.5BB, 3BD, 4BD, 5BD, 6BD
Fits Series e-1532 1.25BC, 1.5BC, 2BD, 2.5BB, 3BD, 4BD, 5BD, 6BD
Fits Series e-80 1.5x1.5x9.5B, 2x2x9.5C, 2.5x2.5x9.5C, 3x3x9.5C, 4x4x9.5B, 5x5x9.5B, 6x6x9.5B, 8x8x9.5B
Drawing Item e-1510: item 11; e-1531: item 2; e-1532: item 2; e-80: item 2
Shaft sleeve at seal 1.625" large bore
Shipping cost: Inquire
Parts Finder canadianpumpshop.com/bell-gossett-parts-finder/
