Product Description
Bell & Gossett Volute Coverplate – Part No. P2002887
Genuine Bell & Gossett replacement volute coverplate, B&G part number P2002887, for Series e-80 pumps. This is the part shown as item 29 on B&G parts list CP-114-PL R3 (highlighted on the drawing above).
Fits these Bell & Gossett pumps
- Series e-80 (vertical in-line) – pump sizes 3x3x13.5, 4x4x13.5, 5x5x13.5
- Seal configuration: stuffing box (-S, -PF)
- Shaft sleeve at seal: 1.625" large bore
Other parts for this pump
Rebuilding a Series e-80 3x3x13.5? These parts are often replaced at the same time:
| Item | Part | B&G part no. |
|---|---|---|
| 1 | Volute | P2004705 |
| 1 | Volute with Stainless Steel Wear Ring | P2004706 |
| 2 | Volute Gasket | P80767 |
| 3 | Impeller Washer | P51230 |
| 4 | Impeller 13.5" Full Diameter – Trimmed to Order | P2000892 |
| 5 | Motor Bracket-motor Frames 254JP-256JP | P85025 |
| 5 | Motor Bracket-motor Frames 284JP-286JP, 324JP-326JP | P85099 |
| 6 | Motor Bracket Capscrew - Motor Frames 254JP-256JP | K03600 |
| 6 | Motor Bracket Capscrew - Motor Frames 284JP-286JP, 324JP-326JP | P19490 |
| 7 | Shaft Sleeve Kit | 185022 |
| 8 | Water Slinger | P77320 |
| 9 | Volute Capscrew | P13780 |
| 9 | Impeller Key | P49372 |
| 13 | Impeller Lockwasher | J23875 |
| 14 | Impeller Capscrew | P13800 |
| 15A | Volute Drains and Suction Gauge Plug - 0.25" NPT | P39040 |
| 17 | Seal Assembly EPR / Carbon vs Tungsten Carbide | 185050LF |
| 18 | Seal Cap | P85086 |
| 19 | Seal Cap Gasket | P85078 |
| 21 | Seal Cap Washer | P10910 |
| 22 | Seal Cap Capscrew | H28200 |
| 23 | Service Kit - Large Bore | 186961 |
| 23 | Packing Ring Set (4 Pieces to Each Set) | P82072 |
| 24 | Lantern Ring Set (2 Pieces to Each Set) | P84986 |
Showing 24 of 35 parts – see the full list in the parts finder.
Not sure this is the right part?
Use our Bell & Gossett Pump Parts Finder: choose Series e-80 and your pump size to see every part highlighted on the exploded drawing. Or send us your pump's nameplate details – call (416) 236-2338 or email sales@bramhambros.com. Bramham Bros is an authorized Bell & Gossett dealer.
Product Videos
Custom Field
Brand Bell & Gossett
B&G Part Number P2002887
Part Type Motor Bracket / Cover Plate
Fits Series e-80 3x3x13.5, 4x4x13.5, 5x5x13.5
Drawing Item e-80: item 29
Seal configuration stuffing box (-S, -PF)
Shaft sleeve at seal 1.625" large bore
Shipping cost: Inquire
Parts Finder canadianpumpshop.com/bell-gossett-parts-finder/
