Product Description
Bell & Gossett Seal Cap Capscrew – Part No. H28200
Genuine Bell & Gossett replacement seal cap capscrew, B&G part number H28200, for Series e-80, e-80SC pumps. This is the part shown as item 22, 18 on B&G parts list CP-114-PL R3 (highlighted on the drawing above).
Fits these Bell & Gossett pumps
- Series e-80 (vertical in-line) – pump sizes 1.5x1.5x7C, 2x2x7B, 2.5x2.5x7B, 3x3x7C, 4x4x7B, 5x5x7B, 6x6x7B, 1.5x1.5x9.5B, 2x2x9.5C, 2.5x2.5x9.5C, 3x3x9.5C, 4x4x9.5B, 5x5x9.5B, 6x6x9.5B, 8x8x9.5B, 3x3x11B, 4x4x11B, 5x5x11, 6x6x11B, 8x8x11B, 8x8x13.5, 3x3x13.5, 4x4x13.5, 5x5x13.5, 6x6x13.5
- Seal configuration: stuffing box (-S, -PF)
- Shaft sleeve at seal: 1.25" small bore, 1.625" large bore
- Series e-80SC (vertical in-line, split coupled) – pump sizes 12x12x13, 14x14x14
- Mechanical seal: inside seal, outside seal
- Quantity per pump: 4
Other parts for this pump
Rebuilding a Series e-80 1.5x1.5x7C? These parts are often replaced at the same time:
| Item | Part | B&G part no. |
|---|---|---|
| 1 | Volute - Standard 175 PSI Working Pressure | P2002390 |
| 1 | Volute with Stainless Steel Wear Ring - Standard 175 PSI W.P. | P2002630 |
| 2 | Volute Gasket | P57700 |
| 3 | Impeller Capscrew | P52350 |
| 4 | Impeller Lockwasher | J23874 |
| 5 | Impeller Washer | P46380 |
| 6 | Impeller 7" Full Diameter – Trimmed to Order | P2000824 |
| 7 | Impeller Key | P49369 |
| 8 | Motor Bracket – Motor Frames 143JP, 145JP, 182JP, 184JP | P85023 |
| 9 | Volute Capscrew | P40020 |
| 11 | Shaft Sleeve | P85075 |
| 12 | Water Slinger | P53550 |
| 15 | Volute Coverplate | P85027 |
| 16 | Volute Coverplate Capscrew | P52320 |
| 17 | Seal Assembly EPR / Carbon vs Tungsten Carbide | P85070 |
| 18 | Seal Cap | P85082 |
| 19 | Seal Cap Gasket | P85077 |
| 20 | Seal Cap Nut | P52380 |
| 21 | Seal Cap Washer | P10910 |
| 23 | Service Kit - Small Bore | 186960 |
| 50 | Hose Braided | P2002542 |
| Stainless Steel Wear Ring | P2001179 | |
| 15a Volute and Bracket Plugs - 0.25" NPT | P39040 | |
| Adapter 1/4 to 1/8 NPT -s, -PF | 511849 |
Showing 24 of 28 parts – see the full list in the parts finder.
Not sure this is the right part?
Use our Bell & Gossett Pump Parts Finder: choose Series e-80 and your pump size to see every part highlighted on the exploded drawing. Or send us your pump's nameplate details – call (416) 236-2338 or email sales@bramhambros.com. Bramham Bros is an authorized Bell & Gossett dealer.
Product Videos
Custom Field
Brand Bell & Gossett
B&G Part Number H28200
Part Type Hardware / Fitting
Fits Series e-80 (1) 1.5x1.5x7C, 2x2x7B, 2.5x2.5x7B, 3x3x7C, 4x4x7B, 5x5x7B, 6x6x7B, 1.5x1.5x9.5B, 2x2x9.5C, 2.5x2.5x9.5C, 3x3x9.5C, 4x4x9.5B, 5x5x9.5B, 6x6x9.5B, 8x8x9.5B, 3x3x11B, 4x4x11B, 5x5x11, 6x6x11B, 8x8x11B, 8x8x13.5, 3x3x13.5, 4x4x13.5, 5x5x13.5
Fits Series e-80 (2) 6x6x13.5
Fits Series e-80SC 12x12x13, 14x14x14
Drawing Item e-80: item 22, 18; e-80SC: item 6D, 7B
Seal configuration stuffing box (-S, -PF)
Shaft sleeve at seal 1.25" small bore, 1.625" large bore
Shipping cost: Inquire
Parts Finder canadianpumpshop.com/bell-gossett-parts-finder/
