Zoeller EX840 Explosion Proof Grinder Pump with 20' Cord - 2 HP, 230 V 1 Ph
The Shark Series® 2 HP Model EX840 nonautomatic Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.
- The industry's only automatic, reversing grinder pump
- 230 V grinder pump for sewage lift station applications
- 2 HP, oil-filled motor and cast iron motor housing for optimal heat dissipation
- 100% Factory Tested
Specifications
| Brand | Zoeller Pump Company |
|---|---|
| Part Number | 840-0064 |
| UPC | 053514268435 |
| Model | EX840 |
| Category | Residential / Light Commercial › Pumps › Grinder |
| Warranty | 1 year limited |
| Horsepower | 2 HP |
| Voltage | 230 V |
| Phase | 1 Ph |
| Amps | 17.2 |
| Hertz | 60 Hz |
| RPM | 3450 |
| Discharge | 1-1/4" NPT |
| Solids Handling | Slurry |
| On/Off Points | Nonautomatic |
| Impeller Type | Vortex |
| Cord Length | 20' (6 m) |
| Shipping Weight | 155 lb |
| Shipping Box (H x W x L) | 32" x 12" x 15" |
Product Details
The industry’s only automatic, reversing grinder pump is designed to pump raw sewage in a sewage ejector application. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice® cutter technology. This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″. The 230 Volt, 2 HP, Model 840 utilizes a vortex impeller. Every time the pump is called to run, the cutter assembly will pump a different direction as the previous rotation. This action reduces the potential of stringy material wrapping around the cutter assembly.
The Shark Series® EX840 requires the use of an intrinsically safe control panel and control switches allowing it to turn the pump on when called upon. The Model 840 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications. The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.
Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.
Features and Benefits
- Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
- Nonautomatic grinder pump requires the use of a control panel and control floats for the on/off operation
- Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
- Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
- Stainless steel screws, handle and hardware to prevent rust and corrosion over the life of the pump
- 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
- Comes with a 1-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
Documents & Downloads
Technical Data
Sales and Marketing
Installation Instructions
- Owner's Manual, X800, FM2615 (2 MB)
Catalogs
Performance Curves
Call for pricing (416) 236-2338 or email sales@bramhambros.com