Zoeller E810 Progressing Cavity Grinder Pump with 20' Cord - 1 HP, 230 V 1 Ph
The Shark Series® 1 HP Model E810 nonautomatic Progressing Cavity Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 2-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.
- 230 V progressing cavity grinder pump for sewage lift stations
- 1 HP, oil-filled motor and cast iron motor housing for optimal heat dissipatio
- 100% Factory Tested
Specifications
| Brand | Zoeller Pump Company |
|---|---|
| Part Number | 810-0004 |
| UPC | 053514184896 |
| Model | E810 |
| Category | Residential / Light Commercial › Pumps › Grinder |
| Warranty | 2 year limited |
| Horsepower | 1 HP |
| Voltage | 230 V |
| Phase | 1 Ph |
| Amps | 7.0 |
| Hertz | 60 Hz |
| RPM | 1725 |
| Discharge | 1-1/4" NPT horizontal |
| Solids Handling | Slurry |
| On/Off Points | Variable level- customer set |
| Impeller Type | Hydraulic rotor and stator |
| Cord Length | 20' (6 m) |
| Shipping Weight | 88 lb |
| Shipping Box (H x W x L) | 24-3/4" x 12" x 15" |
Product Details
The Shark Series® Model 810 Progressing Cavity Grinder Pump is designed to pump raw sewage in sewage ejector applications when pumping to pressurized sewer main. Solids are cut into a slurry using the industry proven “scissor like” Tri-Slice® cutter technology. This includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.
The E810, should use a control panel and control switches allowing it to turn the pump on when called upon. The Model 810 is constructed with a cast iron body, enabling it to withstand the most demanding sewage ejector applications. The pump’s identification tag, handle, and hardware are made of high-quality stainless steel preventing rust and corrosion. Everything about the pump is designed in a way that allows it to hold up in the toughest sewage conditions.
Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.
Features and Benefits
- Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
- Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
- Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
- Pressure relief valve helps prevent damage to your piping system when the pressures in the city main are greater than the pumps PSI rating
- Stainless steel screws, handle and hardware to prevent rust and corrosion over the life of the pump
- 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
- Comes with a 2-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
Documents & Downloads
Technical Data
Sales and Marketing
Parts Lists
- Parts List, Model 810, FM2435 (734 KB)
Installation Instructions
Catalogs
Performance Curves
Call for pricing (416) 236-2338 or email sales@bramhambros.com