Product Description
Armstrong 4380 5x5x13 Vertical In-Line Pump
Series 4380 | Size 5x5x13 | Vertical In-Line | 60 Hz
The Armstrong 4380 5x5x13 is a pipe-mounted vertical in-line (VIL) single pump for HVAC-system pumping and light industrial or process pumping (water or glycol based). It has a 5" suction, a 5" discharge and a 13" nominal size. Like every 4380, it is designed for space-saving installation and long service life, with a silicon sintered carbide seal face.
This is the 60 Hz model. Send us your flow, head, motor and voltage requirements, or the Armstrong model number from your nameplate, and Canadian Pump Shop will confirm the right 5x5x13 for you. The model submittal below has the performance curves and dimensions.
Benefits & Features
Low installed cost
- Vertical in-line design eliminates inertia bases, housekeeping pads, flex connectors, and field alignment or grouting
- Requires less space and pipe
- Design Envelope selections often call for a smaller motor and/or pump, lowering installed cost
Low energy consumption and operating cost
- High-efficiency NEMA-premium motors are available
- All motors are suitable for inverter-fed service
- Shorter pipe runs reduce friction losses and improve system efficiency
Low operating risk
- Universal replacement seals, bearings and motors are available locally worldwide
- The casing stays in place during service, so maintenance is less disruptive
Specifications
| Manufacturer | Armstrong Fluid Technology |
|---|---|
| Series / Model | 4380 / 5x5x13 |
| Frequency | 60 Hz |
| Suction Size | 5" |
| Discharge Size | 5" |
| Nominal Size | 13 |
| Pump Type | Pipe-mounted vertical in-line single pump |
| Applications | HVAC-system pumping; light industrial / process pumping |
| Casing Material | Cast iron or ductile iron |
| Impeller Material Options | Cast iron or bronze |
| Seal Configuration | Inside single-spring mechanical seal, silicon sintered carbide |
| Max Temperature (series) | 250°F (121°C) |
| 4380 Series Range | Up to 2,500 USgpm (160 L/s), up to 300 ft (90 m) head, 0.33 to 60 HP |
Design & Submittals
- 4380 Vertical In-Line Pump 5x5x13, 60Hz Submittal (PDF)
- 4360 & 4380 Vertical In-Line Pumps Brochure (PDF)
- 4360 & 4380 VIL Typical Specifications (DOC)
Warranty
Armstrong pumps are covered by Armstrong's standard terms of sale and warranty. Review the full terms below for coverage details.
Installation, Maintenance, Genuine Parts & Parts Kits
- Series 4300, 4360 & 4380 VIL Installation & Operating Instructions (PDF)
- 4380 & 4360D Service Work Instructions (PDF)
- Mechanical Seal Kits Service Work Instructions (PDF)
- Shaft Sleeve and Spacer Replacement Instructions, 6042.25 (PDF)
- Pump FlushLine Hose & Hardware Kits Instructions (PDF)
- 4380 "S" Replacement Parts (PDF)
- 4380 "M" Replacement Parts (PDF)
- Armstrong Genuine Replacement Parts & Parts Kits (web page)
Always use genuine Armstrong parts, including seals, bearings and parts kits, to keep your 4380 performing to specification.
Please note: Motors and accessories vary by configuration. Not sure which seal kit or replacement parts you need for your 4380 5x5x13? Contact Canadian Pump Shop and we'll help match them to your system.