null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Wilo SCP 5x4x16 DS-TEFC-4-75-365T-460V Split Case Pump - 75 HP

Wilo

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
WILO-SCP-5X4X16-DS-TEFC-4-75-365T-460V
Genuine Wilo · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Wilo
Series:
SCP
Part Number:
Order by model number
Max. fluid temperature (Tmax):
250 °F
Mains connection:
3~230/460 V, 60 Hz
Rated power (P2):
75.00 hp
Pipe connection, suction side DNs:
5" 125# ANSI
Pipe connection, discharge side DNd:
4" 125# ANSI
Design Type:
Axially split pump

Wilo SCP 5x4x16 DS-TEFC-4-75-365T-460V Split Case Pump - 75 HP

The Wilo SCP 5x4x16 DS-TEFC-4-75-365T-460V is a split case pump from the Wilo SCP series. Typical applications: Heating and Cooling Systems Transfer and Pressure Boosting Boiler Feed/Condensate Municipal Water Supply Irrigation Industrial Applications Max. Flow: 5,000 GPM Max. Head: 180 feet.

Article number: Order by model number

Hydraulic data

Discharge port4" 125# ANSI
Min. ambient temperature (Tmin)-4 °F
Max. ambient temperature (Tmax)104 °F
Min. fluid temperature (Tmin)18 °F
Max. fluid temperature (Tmax)250 °F

Motor data

Mains connection3~230/460 V, 60 Hz
Rated power (P2)75.00 hp
Rated current IN174 A
Power factor cos φ1000.83
Efficiency ηM95.4 %
Enclosure constructionRolled Steel / Cast Iron
Enclosure typeTotally Enclosed Fan Cooled (TEFC)
Insulation classF
Protection class motorIP55
Rated speed (n)1780 RPM

Installation dimensions

Pipe connection, suction side DNs5" 125# ANSI
Pipe connection, discharge side DNd4" 125# ANSI

Materials

Pump housingGrey cast iron
Shaft seal typeAQ1EGG
Pump housing materialASTM A48, Class No. 35
ImpellerAISI 304L
ShaftAISI 410

dim_table_scp

Dimensions DN15" 125# ANSI
Dimensions DN24" 125# ANSI

Dimensions and weight

Net weight, approx.1584.0 lb (718.5 kg)

About the Wilo SCP series

Design

  • Horizontal split case, single and two stage, base mounted centrifugal pump

Application

  • Heating and Cooling Systems
  • Transfer and Pressure Boosting
  • Boiler Feed/Condensate
  • Municipal Water Supply
  • Irrigation
  • Industrial Applications
  • Max. Flow: 5,000 GPM
  • Max. Head: 180 feet

Equipment/function

Horizontal split casing allows replacement of bearings and mechanical seal without disturbing the system piping

Double suction design available for maximum efficiencies

Hydraulically balanced double-suction impeller for minimal axial thrust

Tongue & groove neck ring design eliminates seizing of rotating assembly

Pump shaft guards

Type key

SCP 3 x 2 x 13 DS

SCP

Split Case Pump

3

Suction (inlet) flange size (inch)

2

Discharge (outlet) flange size (inch)

13

Impeller diameter max

HA

Standard type A

HB

Standard type B

HS

Single stage hydraulic

DS

Two-stage hydraulic

DV

Double Volute

Technical data

  • Power supply: 208-230/460/3/60 and 575/3/60 Volt
  • Fluid temperature range: 18 to 250 °F (-8 to +120 °C)
  • Operating pressure: 250 PSI (16 Bar) or 363 PSI (25 Bar)
  • Suction flange size range: 2 1/2" to 20", Class 125 ANSI type
  • Discharge flange size range: 2" to 16", Class 125 ANSI type
  • Maximum Head: 180'
  • Maximum flow: 5000 USGPM
  • Max Hp: 500 Hp

Materials

  • Pump housing: ASTM A48 Class 35 gray cast iron
  • Impeller: ASTM B584 C83600 Leaded Tin Bronze
  • Shaft: AISI 410 Stainless Steel

Description/construction

  • Horizontal split case, single or double suction, single or two stage base mounted centrifugal pump
  • Mechanical sealed (gland packed version optional)
  • 60 Hz, 2-, 4- and 6-pole motors, ODP standard, TEFC optional
  • Optional spacer coupling

Scope of delivery

  • Pump end only (bare shaft pump) or
  • Pump, base, coupling and coupling guard or
  • Complete assembly (pump, base, coupling, guard and motor)
  • Installation and operating instructions

Options

  • Automatic pump control via WILO CC HVAC Controller
  • Higher flows up to 15,400 USGPM, 70,000 USGPM as special version
  • Special motor (6000V, 10 000 V etc.)
  • Special construction
    • Impeller: Lead free bronze, grey cast iron, stainless steel
    • Housing: Grey cast iron, ductile iron, Ni-resist cast iron, stainless steel

Consulting guide

Project:Engineer:Contractor:Submitted By:Date:Approved By:Date:

Your advantages

  • Horizontal split casing allows replacement of bearings and mechanical seal without disturbing the system piping
  • Double suction design available for maximum efficiencies
  • Hydraulically balanced double-suction impeller for minimal axial thrust
  • Tongue & groove neck ring design eliminates seizing of rotating assembly
  • Pump shaft guards

Documents and downloads

Call for pricing (416) 236-2338 or email sales@bramhambros.com