Wilo CronoLine-IL 2-80/280-2 In-Line Pump - 5 HP
The Wilo CronoLine-IL 2-80/280-2 is a in-line pump from the Wilo CronoLine-IL series. Typical applications: Hot Water Heating systems Closed Cooling Circuits Air Conditioning Industrial Circulation Solar Geothermal Max. Flow: 1450 GPM Max. Head: 440 feet.
Article number: 2760760
Hydraulic data
| Maximum operating pressure | 175 psi |
|---|---|
| Min. fluid temperature (Tmin) | -5 °F |
| Max. fluid temperature (Tmax) | 285 °F |
| Max. ambient temperature (Tmax) | 104 °F |
Motor data
| Mains connection | 3~208-230/460 V, 60 Hz |
|---|---|
| Number of poles | 2 |
| Rated power (P2) | 5.00 hp |
| Insulation class | F |
| Motor protection | no |
Materials
| Pump housing | 5.1301/EN-GJL-250 KTL-coated |
|---|---|
| Mechanical seal | Q1Q1X4GG |
| Pump housing material | EN-GJL-250 (ASTM A48) |
| Impeller | Bronze, C90700 |
| Shaft | AISI 316L |
Installation dimensions
| Pipe connection, suction side DNs | Drilled for 2" Class 125 ANSI |
|---|---|
| Pipe connection, discharge side DNd | Drilled for 2" Class 125 ANSI |
Dimensions and weight
| Length (L) | 14.50 in |
|---|---|
| Height (H) | 25.90 in |
| Width (W) | 11.58 in |
| Net weight, approx. | 158.7 lb (72 kg) |
Performance curve and submittal data

Optional flanges & fittings
- Wilo 2" Cast Iron ANSI 150# Flange Kit - $134.75
- Wilo 2" Cast Iron ANSI 150# Flange Half Kit - $81.95
- Wilo 2" Round Flange Gasket - $12.65
- Wilo 2.00" Gasket for ANSI 150# Flange - $6.05
Replacement parts
- Wilo IL Mechanical Seal Kit 2064430 - $487.85
About the Wilo CronoLine-IL series
Design
Single stage inline, flanged, long coupled, mechanical sealed dry rotor pumpApplication
Hot Water Heating systems
Closed Cooling Circuits
Air Conditioning
Industrial Circulation
Solar
Geothermal
Max. Flow: 1450 GPM
Max. Head: 440 feet
Equipment/function
- Inline bronze fitted (std) or optional all iron pump
- Coupled to motor via split coupling
- Standard NEMA frame Baldor motor
Type key
Model: | IL 1.25 40/70-4 |
IL | Inline pump |
1.25 | Flange Size |
40 | Max. Head |
70 | Max. GPM |
4 | Motor Poles |
Technical data
- TEFC motors standard (ODP available)
- Fluid Temp Range: -5°F to 285°F (-20°C to140°C)
- Max Amb Temp: 104°F (40 °C)
- Electrical Connections: 1~115v, 230v3~208-230v, 460v, 575v
Materials
- Cast Iron, Cataphoresis Coated Volute
- Trimmable Bronze Impeller
- Stainless Steel Stub Shaft
Description/construction
- Single stage low pressure centrifugal, inline design with mechanical seal
- Baldor NEMA standard motors
Scope of delivery
- Pump and motor (optionally pump end only)
- Installation and operating instructions
Your advantages
- Integral suction diffuser cast in volute inlet
- All bolts “non-metric”
- Pump feet drilled and tapped
- Class 125 ANSI standard flanges
Documents and downloads
Call for pricing (416) 236-2338 or email sales@bramhambros.com