Product Description
WEG PB005504NPW22 184HP Frame TEFC P-Base Vertical Pump Motor, Footless, 1800 RPM - 5 HP, 575V 3 Ph
WEG W22 cast iron TEFC three-phase p-base vertical pump motor, 5 HP at 1800 RPM, NEMA 184HP frame (footless C-face), 575V, 60 Hz. Part number PB005504NPW22.
Key specifications
| Part Number | PB005504NPW22 |
|---|---|
| Horsepower | 5 HP (3.7 kW) |
| Speed | 1800 RPM (rated 1750 rpm) |
| Voltage | 575 V |
| Phase / Frequency | Three phase, 60 Hz |
| NEMA Frame | 184HP - footless |
| Enclosure | IC411 - TEFC |
| Full Load Amps | 5.19 A |
| Service Factor | 1.25 |
| NEMA Design | B |
| Insulation Class | F |
| Mounting | W-6 |
| DE / NDE Bearings | 6308 ZZ / 6206 ZZ |
| Frame Material | Cast Iron |
| Series | W22 - P-Base Three-phase NEMA Premium TEFC |
Full technical data
| Number of Poles | 4 |
|---|---|
| Flange | P |
| Terminal Box | Left position |
| Ambient Temperature | -20°C to +40°C |
| Duty Cycle | Cont.(S1) |
| Service Factor | 1.25 |
| Design | B |
| Locked Rotor Time | 27s (cold) 15s (hot) |
| Rated Torque | 15.0 ft.lb |
| Locked Rotor Current | 7.5x(Code J) |
| Full Load Amps | 5.19 A |
| Rated Speed | 1750 rpm |
| Degree of Protection | IP55 |
| Standard | NEMA MG-1 |
| Impregnation Method | Dip and Bake Polyester |
| Terminal Block | Without |
| Drain | Rubber, automatic |
| Painting | RAL 5009 207A (ISO 12944 - C3) |
| Fan Cover Material | Steel |
| Fan Material | Plastic |
| Balancing Method | 1/2 Key |
| Overload Protector (Phenolic) | Without overload protector |
| Grease Type | Mobil Polyrex EM |
| Rotation | Both (CW and CCW) |
| DE Bearing | 6308 ZZ |
| NDE Bearing Seal | V'Ring |
| Output | 5 HP (3.7 kW) |
| Altitude | 1000 m.a.s.l. |
| Starting Method | Direct On Line |
| Temperature Rise | 80 K |
| Insulation Class | F |
| Moment of Inertia (J) | 0.4003 sq.ft.lb |
| Breakdown Torque | 300 % |
| No Load Current | 2.40 A |
| L. R. Amperes | 38.9 A |
| Slip | 2.78 % |
| Mounting | W-6 |
| Frequency | 60 Hz |
| Frame Material | Cast Iron |
| Main Terminal Box Hole (in) | NPT 1" |
| Shaft Locking Device | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Grounding Lugs | Single |
| Tropicalized Painting | Without |
| Bearing Cap | Yes- Bearing Cap |
| Drip Cover | With |
| NDE Bearing | 6206 ZZ |
| Locked Rotor Torque | 229 % |
| Noise Level | 56.0 dB(A) |
| Sealing | V'Ring |
Documents
Find another WEG motor with the WEG Motor Finder | Questions? Call (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand WEG
Part Number PB005504NPW22
Horsepower 5 HP
RPM 1800
Voltage 575V
Phase 3 Ph
NEMA Frame 184HP
Enclosure TEFC
Full Load Amps 5.19 A
Service Factor 1.25
Series W22 - P-Base Three-phase NEMA Premium TEFC
