Product Description
WEG JM010504NPW01 213JM/215JM Frame TEFC Close-Coupled Pump Motor, 1800 RPM - 10 HP, 575V 3 Ph
WEG W01 rolled steel TEFC three-phase close-coupled pump motor, 10 HP at 1800 RPM, NEMA 213JM/215JM frame, 575V, 60 Hz. Part number JM010504NPW01.
Key specifications
| Part Number | JM010504NPW01 |
|---|---|
| Horsepower | 10 HP (7.5 kW) |
| Speed | 1800 RPM (rated 1760 rpm) |
| Voltage | 575 V |
| Phase / Frequency | Three phase, 60 Hz |
| NEMA Frame | 213JM/215JM |
| Enclosure | IC411 - TEFC |
| Full Load Amps | 9.76 A |
| Service Factor | 1.15 |
| NEMA Design | B |
| Insulation Class | F |
| Mounting | F-1 |
| DE / NDE Bearings | 6209 ZZ / 6206 ZZ |
| Frame Material | Rolled Steel |
| Series | W01 JM/JP Three-phase TEFC |
Full technical data
| Number of Poles | 4 |
|---|---|
| Flange | C |
| Terminal Box | Left position |
| Ambient Temperature | -20°C to +40°C |
| Duty Cycle | Cont.(S1) |
| Service Factor | 1.15 |
| Design | B |
| Locked Rotor Time | 27s (cold) 15s (hot) |
| Rated Torque | 29.8 ft.lb |
| Locked Rotor Current | 7.0x(Code H) |
| Full Load Amps | 9.76 A |
| Rated Speed | 1760 rpm |
| Degree of Protection | IP55 |
| Standard | NEMA MG-1 |
| Impregnation Method | Dip and Bake Polyester |
| Terminal Block | Without |
| Shaft Material | SAE 1040/45 Carbon Steel |
| Grounding Lugs | Single |
| Tropicalized Painting | Without |
| Bearing Cap | Yes- Bearing Cap |
| Drip Cover | Without |
| NDE Bearing | 6206 ZZ |
| Locked Rotor Torque | 250 % |
| Noise Level | 60.0 dB(A) |
| NDE Bearing Seal | Without Bearing Seal |
| Output | 10 HP (7.5 kW) |
| Altitude | 1000 m.a.s.l. |
| Starting Method | Direct On Line |
| Temperature Rise | 80 K |
| Insulation Class | F |
| Moment of Inertia (J) | 1.07 sq.ft.lb |
| Breakdown Torque | 300 % |
| No Load Current | 4.43 A |
| L. R. Amperes | 68.3 A |
| Slip | 2.22 % |
| Mounting | F-1 |
| Frequency | 60 Hz |
| Frame Material | Rolled Steel |
| Main Terminal Box Hole (in) | 1.377" |
| Drain | Rubber, automatic |
| Painting | Munsell N 1 - Matte 207N (ISO 12944 - C2) |
| Fan Cover Material | Steel |
| Fan Material | Plastic |
| Balancing Method | 1/2 Key |
| Overload Protector (Phenolic) | Without overload protector |
| Grease Type | Mobil Polyrex EM |
| Rotation | Both (CW and CCW) |
| DE Bearing | 6209 ZZ |
Documents
Find another WEG motor with the WEG Motor Finder | Questions? Call (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand WEG
Part Number JM010504NPW01
Horsepower 10 HP
RPM 1800
Voltage 575V
Phase 3 Ph
NEMA Frame 213JM/215JM
Enclosure TEFC
Full Load Amps 9.76 A
Service Factor 1.15
Series W01 JM/JP Three-phase TEFC
