Product Description
Bell & Gossett Tapered Washer Capscrew – Part No. 510830
Genuine Bell & Gossett replacement tapered washer capscrew, B&G part number 510830, for Series e-80SC pumps. This is the part shown as item 15 on B&G parts list CP-115-PL (highlighted on the drawing above).
Fits these Bell & Gossett pumps
- Series e-80SC (vertical in-line, split coupled) – pump sizes 1.5x1.5x7C, 2x2x7B, 2.5x2.5x7B, 3x3x7C, 4x4x7B, 5x5x7B, 6x6x7B
- Motor frame: 143, 145, 182, 184 frames
Other parts for this pump
Rebuilding a Series e-80SC 1.5x1.5x7C? These parts are often replaced at the same time:
| Item | Part |
|---|---|
| 1 | Volute |
| 2 | Volute Gasket |
| 3 | Volute Capscrew |
| 4 | Impeller 7" Full Dia – Trimmed to Order |
| 5 | Bearing |
| 6 | Mechanical Seal Kit |
| 6 | Cap |
| 6 | Capscrew |
| 6 | Gasket |
| 6 | Snap Ring |
| 6 | Washer |
| 7 | Mechanical Seal Kit |
| 7 | Capscrew |
| 7 | Gland |
| 8 | Motor Bracket (Inside Seal) |
| 8 | Motor Bracket (Outside Seal) |
| 9 | Impeller Bolt |
| 10 | Impeller Lockwasher |
| 11 | Impeller Washer |
| 12 | Impeller Key |
| 13 | Shaft |
| 14 | Coupling Key |
| 15 | Tapered Washer |
| 15 | Tapered Washer Lockwasher |
Showing 24 of 37 parts – see the full list in the parts finder.
Not sure this is the right part?
Use our Bell & Gossett Pump Parts Finder: choose Series e-80SC and your pump size to see every part highlighted on the exploded drawing. Or send us your pump's nameplate details – call (416) 236-2338 or email sales@bramhambros.com. Bramham Bros is an authorized Bell & Gossett dealer.
Product Videos
Custom Field
Brand Bell & Gossett
B&G Part Number 510830
Part Type Hardware / Fitting
Fits Series e-80SC 1.5x1.5x7C, 2x2x7B, 2.5x2.5x7B, 3x3x7C, 4x4x7B, 5x5x7B, 6x6x7B
Drawing Item e-80SC: item 15
Shipping cost: Inquire
Parts Finder canadianpumpshop.com/bell-gossett-parts-finder/
