Product Description
Barnes XZSGV2042L Grinder Pump - 2 HP, 480V 3-Phase
The Barnes XZSGV2042L is a 2 HP submersible grinder pump from the Razor line by Crane Pumps & Systems, 480/3 volts/phase. Discharge: 1¼” NPT. Part number 149197. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | XZSGV2042L |
|---|---|
| Part Number | 149197 |
| Horsepower | 2 |
| Voltage | 480 |
| Phase/Hz | 3/60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | L |
| Full Load Amps | 4.6 |
| Locked Rotor Amps | 22.0 |
| Cord Size | 12/3 |
| Cord Type | SOW |
| Cord O.D. ± 0.02 -0.5In (Mm) | 0.65 |
| Voltage / Phase | 480/3 |
Performance Curve
Dimensions
All dimensions are in inches (mm).
Specifications
| Impeller | Design: 12 Vane vortex, with pump out vanes on back side. Dynamically balanced, ISO G6.3. |
|---|---|
| Seal | Material:Cast iron |
| Cord Entry | 30 ft. (9.1 m) Custom plug & play for sealing and strain relief |
| Cord | CSA/UL Approved, 12/4 Type SOW |
| Discharge | 1¼” NPT |
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast Iron ASTM A-48, Class 30 |
| Cutter Plate | Hardened 440C stainless steel Rockwell® C-55 |
| Cutter | Hardened 440C stainless steel, Rockwell® C-55 |
| Shaft | 416 Stainless steel |
| O-Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Powder coat |
| Upper Bearing | Design:Single row, ball |
| Lower Bearing | Design:Single row, ball |
| Moisture Sensors | Normally open (N/O), Requires relay in control panel |
| Temperature Sensors | Normally closed (N/C), Requires relay in control panel |
| Certification | CSA 145, Class 1 Division 1, Groups C&D |
| Motor | Design: NEMA L-Single phase torque curve, oil-filled, squirrel cage induction (includes overload protection in the motor), NEMA B three phase torque curve |
Notes
- Moisture and temperature sensors must be connected to validate the csa listing.
- A non-sparking c-channel fitting must be used to validate the csa listing.
- A special moisture sensor relay is required in the control panel for proper operation of the moisture sensors.contact barnes pumps for information concerning moisture sensing relays for customer supplied control panels.
- These pumps are listed for pumping water and wastewater. Do not use to pump flammable liquids.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
Documents
- Engineering Specifications (XZOGP)
- Engineering Specifications (XZSGV)
- I&O Manual
- Station Drawings
- Sales Sheet
- Brochure
Optional Accessories
STEALTH Control Panel, Lifting Rope, C-Channel Moveable Fitting & Check Valve, Lifting Chain, C-Channel Guide Rail System, Flexible Discharge Hose, Pump Stand, Direct Burial Cable, Capacitor/Relay Packs, Vertical Break Away Fitting, Intermediate Rail Support for Vertical BAF, Videos. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Grinder Pumps
Series Razor
Model XZSGV2042L
Part Number 149197
Horsepower 2 HP
Voltage / Phase 480/3
RPM 3450
Full Load Amps 4.6
Discharge 1¼” NPT
