Product Description
Barnes XGVHH150N2 Explosion Proof Grinder Pump - 15 HP, 208/230/460V
The Barnes XGVHH150N2 is a 15 HP submersible grinder pump from the Blade / XGVHH line by Crane Pumps & Systems, 208 & 230 & 460 volts/phase. Discharge: Horizontal, 2.50"/3". Part number 141375. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number - Voltage | XGVHH150N2 - 208 |
|---|---|
| Part Number | 141375 |
| Horsepower | 15 |
| Voltage | 208 |
| Phase | 3 |
| Hz | 60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | E |
| Full Load Amps | 59.0 |
| Service Factor | 1 |
| Locked Rotor Amps | 195.7 |
| Driver Frame | 21 |
| Cord Part Number | 125498 |
| Cord Size | 8/4 - 18/4 |
| Cord O.D. | 1.12 ± .02 |
| Voltage / Phase | 208 |
| Explosion Proof, Class 1, Div 1, Groups C & D | T4 |
| Available Voltages | 208, 230, 460 |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller dia in. (mm) |
|---|---|
| 15 | 8.00 (203) |
| 10 | 6.50 (165) |
| 7.5 | 5.75 (146) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | Horizontal, 2.50"/3" |
|---|---|
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 12 Vane vortex, with pump out vanes on back side. Dynamically balanced, ISO G6.3 |
| Shredding Ring | Hardened 440C stainless steel, Rockwell® C-55 |
| Cutter | Hardened 440C Stainless Steel, Rockwell® C-55 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Axalta™ Corlar® Epoxy, two coats |
| Seal | Design:Tandem mechanical, oil filled reservoir |
| Cord Entry | Custom molded, quick connected for sealing and strain relief |
| Power Cord | CSA certified submersible power cable 2000V - ordered separately |
| Upper Bearing | Design:Single row, ball |
| Lower Bearing | Design:Double row, ball |
| Motor | Design: NEMA B Three phase torque curve Oil-filled squirrel cage induction Inverter duty rated per NEMA MG1 |
| Single Phase | Requires overload protection to be included in control panel. Requires start components to be included in panel. Provided with pump |
| Three Phase | Requires overload protection to be included in control panel |
| Moisture Sensors | Normally open (N/O), Requires relay in control panel |
| Temperature Sensor | Normally closed (N/C) To be wired in series with control circuit |
Notes
- Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet. ▲ Cord sold separately. Single Phase pumps require start components to be included in panel. Provided with pump.
Documents
Optional Accessories
STEALTH Control Panel, Lifting Rope, Intermediate Rail Supports for Horizontal Break Away Fitting, Lifting Chain, Pump Monitor Relay, Lifting Cable, Horizontal Break Away Fittings ( 18 Frame Requires Spool Piece), Leg Kit, Videos. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Grinder Pumps
Series Blade / XGVHH
Model XGVHH150N2
Part Number 141375
Horsepower 15 HP
Voltage / Phase 208, 230, 460
Hz 60
RPM 3450
Full Load Amps 59.0
Driver Frame 21
Discharge Horizontal, 2.50"/3"
Explosion Proof Yes
