Product Description
Barnes XGV3072 Explosion Proof Grinder Pump - 3 HP, 208/230V
The Barnes XGV3072 is a 3 HP submersible grinder pump from the Blade / XGV line by Crane Pumps & Systems, 208 & 230 volts/phase. Discharge: Vertical 2" NPT. Part number 141339. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number - Voltage | XGV3072 - 208 |
|---|---|
| Part Number | 141339 |
| Horsepower | 3 |
| Voltage | 208 |
| Phase | 1 |
| Hz | 60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | J |
| Full Load Amps | 25.0 |
| Service Factor | 1 |
| Locked Rotor Amps | 113.2 |
| Driver Frame | 18 |
| Cord Part Number | 125496 |
| Cord Size | 12/4 - 18/4 |
| Cord O.D. | 0.86 ± 0.02 |
| Voltage / Phase | 208 |
| Explosion Proof, Class 1, Div 1, Groups C & D | T4 |
| Available Voltages | 208, 230 |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller dia in. (mm) |
|---|---|
| 7.5 | 6.25 (159) |
| 5 | 5.25 (133) |
| 3 | 4.50 (114) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | Vertical 2" NPT |
|---|---|
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 12 Vane vortex, with pump out vanes on back side. Dynamically balanced, ISO G6.3 |
| Shredding Ring | Hardened 440C stainless steel, Rockwell® C-55 |
| Cutter | Hardened 440C Stainless Steel, Rockwell® C-55 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Axalta™ Corlar® Epoxy, two coats |
| Seal | Design:Tandem mechanical, oil filled reservoir |
| Cord Entry | Custom molded, quick connected for sealing and strain relief |
| Power Cord | CSA certified submersible power cable 2000V - ordered separately |
| Upper Bearing | Design:Single row, ball |
| Lower Bearing | Design:Double row, ball |
| Motor | Design: NEMA B Three phase torque curve Oil-filled squirrel cage induction Inverter duty rated per NEMA MG1 |
| Single Phase | Requires overload protection to be included in control panel. Requires start components to be included in panel. Provided with pump |
| Three Phase | Requires overload protection to be included in control panel |
| Moisture Sensors | Normally open (N/O), Requires relay in control panel |
| Temperature Sensor | Normally closed (N/C) To be wired in series with control circuit |
Notes
- Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet. ▲ Cord sold separately. Single Phase pumps require start components to be included in panel. Provided with pump.
Documents
Optional Accessories
STEALTH Control Panel, Intermediate Rail Supports for Vertical Break Away Fitting, C-Channel Guide Rail System, Lifting Rope, Pump Monitor Relay, Lifting Chain, Vertical Break Away Fittings, Lifting Cable, C-Channel Moveable Fitting, Leg Kit, Videos. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Grinder Pumps
Series Blade / XGV
Model XGV3072
Part Number 141339
Horsepower 3 HP
Voltage / Phase 208, 230
Hz 60
RPM 3450
Full Load Amps 25.0
Driver Frame 18
Discharge Vertical 2" NPT
Explosion Proof Yes
