Product Description
Barnes SGVH2002L Grinder Pump - 2 HP, 200V
The Barnes SGVH2002L is a 2 HP submersible grinder pump from the Other Grinder Pumps / SGV line by Crane Pumps & Systems, 200 volts/phase. Recessed Vortex. Discharge: 1¼” NPT, Vertical, bolt-on flange. Part number 110620. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | SGVH2002L* |
|---|---|
| Part Number | 110620 |
| Horsepower | 2 |
| Voltage | 200 |
| Ph/Hz | 1/60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | F |
| Full Load Amps | 17.0 |
| Locked Rotor Amps | 53.0 |
| Cord Size | 12/4 |
| Cord O.D. | SOW |
| Cord O.D. ± .02 (.5) In (Mm) | 0.67 (17) |
| Voltage / Phase | 200 |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia in. (mm) |
|---|---|
| 2 | 5.63 (143) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | 1¼” NPT, Vertical, bolt-on flange |
|---|---|
| Liquid Temperature | 160°F (71°C) Intermittent |
| Cord Entry | 30 ft. (9.1 m) Std. Cord. Custom molded quick connect, for sealing and strain relief |
| Cord | CSA/UL Approved 12/4 type SOW |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 12 Vane, vortex, with pump out vanes on back side. Dynamically balanced, ISO G6.3 |
| Shredding Ring | Hardened 440C stainless steel Rockwell® C-55 |
| Cutter | Hardened 440C stainless steel, Rockwell® C-55 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series Stainless Steel |
| Paint | Air dry enamel |
| Seal | Design: Tandem mechanical, oil filled reservoir |
| Upper Bearing | Design:Single row, ball, oil lubricated |
| Intermediate Bearing | Design:Single row, ball, oil lubricated |
| Lower Bearing | Design:Sleeve, oil lubrication |
| Single Phase | Capacitor start/capacitor run. Includes overload protection in the motor. Requires Barnes® Starter or Control Panel which includes capacitors, or capacitor pack |
| Three Phase | Dual voltage 240/480; requires overload protection to be included in the control panel |
| Motor | Design:NEMA L-single phase, (SGVF2022L, SGVH2022L, SGVF2002L or SGVH2002L, includes overload protection in the motor). NEMA B-three phase torque curve. oil-filled, squirrel cage induction |
Notes
- Optional temperature sensor cord for all models is 14/3 SOW, 0.55 (14mm) ± .02 (.51mm) O.D. (Not used on SGVF2022L, SGVH2022L, SGVF2002L or SGVH2002L).
- Optional moisture and temperature sensor cord for all models is 18/5 SOW, 0.49 (12.4mm) ± .02 (.51mm) O.D., replaces Temperature sensor cord.
- (*) This pump is NOT CSA listed
- Models sgvf2002l and sgfh2002l are not csa listed
- Pump may be operated “dry” for extended periods without damage to motor and/or seals.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
Documents
Optional Accessories
STEALTH Control Panel, Direct Burial Cord, Flexible Discharge Hose, Vertical Break Away Fittings, Capacitor/Relay Packs, C-Channel Guide Rail System, C-Channel Moveable Fitting, Grinder Pump Stand, ESPS, Lifting Cable, Lifting Rope, Lifting Chain, Intermediate Rail Support for Vertical Break Away Fitting. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Grinder Pumps
Series Other Grinder Pumps / SGV
Model SGVH2002L
Part Number 110620
Horsepower 2 HP
Voltage / Phase 200
RPM 3450
Full Load Amps 17.0
Discharge 1¼” NPT, Vertical, bolt-on flange
