Product Description
Barnes SGV5062L Grinder Pump - 5 HP, 200V 3-Phase
The Barnes SGV5062L is a 5 HP submersible grinder pump from the Other Grinder Pumps / SGV line by Crane Pumps & Systems, 200/3 volts/phase. Recessed Vortex. Discharge: 2” NPT, Vertical. Part number 111619. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | SGV5062L |
|---|---|
| Part Number | 111619 |
| Horsepower | 5 |
| Voltage / Phase | 200/3 |
| Hz | 60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | K |
| Full Load Amps | 25.0 |
| Locked Rotor Amps | 122.0 |
| Cord Size | 10/4 |
| Cord O.D. | SOW |
| Cord O.D. ± .02 (.5) In (Mm) | 0.75 (19) |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia in. (mm) |
|---|---|
| 3 | 5.00 (127) |
| 5 | 6.25 (159) |
| 7.5 | 6.46 (164) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | 2” NPT, Vertical |
|---|---|
| Liquid Temperature | 104°F (40°C) Continuous |
| Cord Entry | SGV5002L & SGV5022L: 30 ft. (9m) Std. Cord. Pressure grommet for sealing and strain reliefAll Other Models: 30 ft. (9.1 m) Std. Cord. Custom molded quick connect, for sealing and strain relief |
| Cord | CSA/UL Approved 10/4, 6/4, 8/4 type SOW. |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 12 Vane, vortex, with pump out vanes on back side. Dynamically balanced, ISO G6.3 |
| Shredding Ring | Hardened 440C stainless steel Rockwell® C-55 |
| Cutter | Hardened 440C stainless steel, Rockwell® C-55 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series Stainless Steel |
| Paint | Air dry enamel |
| Seal | Design: Tandem mechanical, oil filled reservoir |
| Upper Bearing | Design:Single row, ball, oil lubricated |
| Intermediate Bearing | Design:Single row, ball, oil lubricated |
| Lower Bearing | Design:Sleeve, oil lubrication |
| Single Phase | Capacitor start/capacitor run. Includes overload protection in the motor. Requires Barnes® Starter or Control Panel which includes capacitors, or capacitor pack |
| Three Phase | Dual voltage 240/480; requires overload protection to be included in the control panel |
| Motor | Design:NEMA L-single phase, NEMA B-three phase torque curve. oil-filled, squirrel cage induction |
Notes
- Pump may be operated “dry” for extended periods without damage to motor and/or seals.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
- Temperature sensor cord for SGV5002L & SGV5022L is 14/2 SOW, 0.55 (14mm) ± .02 (.51mm) O.D.Temperature sensor cord for all other models is 14/3 SOW, 0.55 (14mm) ± .02 (.51mm) O.D.
- Optional - Moisture and Temperature sensor cord for all models is 18/5 SOW, 0.47 (12mm) ± .02 (.51mm) O.D., replaces Temperature sensor cord.
Documents
Optional Accessories
STEALTH Control Panel, Direct Burial Cord, Flexible Discharge Hose, Vertical Break Away Fittings, Capacitor/Relay Packs, C-Channel Guide Rail System, C-Channel Moveable Fitting, Grinder Pump Stand, ESPS, Lifting Cable, Lifting Rope, Lifting Chain, Intermediate Rail Support for Vertical Break Away Fitting. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Grinder Pumps
Series Other Grinder Pumps / SGV
Model SGV5062L
Part Number 111619
Horsepower 5 HP
Voltage / Phase 200/3
Hz 60
RPM 3450
Full Load Amps 25.0
Discharge 2” NPT, Vertical
