Product Description
Barnes SE52 Sewage Ejector Pump – 0.5 HP, 240V 1-Phase
The Barnes SE52 (part number 104874) is a 0.5 HP submersible sewage ejector pump from the SE-L line by Crane Pumps & Systems, rated 240V 1-phase at 1750 RPM. 2" Spherical Solids Handling - Manual & Automatic. Discharge: 2” NPT, Female, vertical. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | SE52 |
|---|---|
| Part Number | 104874 |
| Horsepower | 0.5 |
| Voltage / Phase | 240/1 |
| Hz | 60 |
| RPM (Nominal) | 1750 |
| NEMA Start Code | J |
| Insulation Class | B |
| Full Load Amps | 5.9 |
| Locked Rotor Amps | 14.9 |
| Cord Size | 14/3 |
| Cord Type | SOW |
| Cord O.D. in (mm) | 0.530 (13.5) |
| Weight (lbs) | 85 |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia mm (in.) |
|---|---|
| 0.5 | 133 (5.25) |
| 0.75 | 143 (5.62) |
| 1.00 | 152 (6.00) |
Dimensions
All dimensions are in inches (mm).
SE51, SE52, SE-L
Specifications
| Discharge | 2” NPT, Female, vertical |
|---|---|
| Speed | 1750 RPM (Nominal) |
| Liquid Temperature | 104°F (40°C) Continuous |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 2 Vane, open, with pump out vanes on back side. Dynamically balanced, ISO G6.3 Material: Cast iron ASTM A-48, class 30 |
| Cord Entry | 15 ft. (5m) Quick disconnect cord with plug On 115 volt, pressure grommet for sealing and strain relief |
| Single Phase | Permanent split capacitor (PSC) includes overload protection in motor |
| Three Phase | 200-240/480 is Tri-Voltage motor 600V. Requires overload Protection to be included in control panel |
| Motor | Design:NEMA L -single phase, NEMA B -three phase torque curve, oil filled, squirrel cage induction Insulation:Class B |
| Upper Bearing | Design: Single row, ball Lubrication: Oil Load: Radial |
| Lower Bearing | Design: Single row, ball Lubrication: Oil Load: Radial & Thrust |
| Volute | Cast iron ASTM A-48, class 30 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Air dry enamel |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Seal Kit P/N | 130180 |
| Service Kit P/N | 130207 |
| Level Control | "A" - Wide angle, PVC, mechanical, 15 ft (5m) cord with piggy-back plug, N/O "AU"- Wide angle, polypropylene, mechanical, N/O, integral to pump. ON and OFF points are adjustable |
Important
- Pump may be operated “dry” for extended periods without damage to motor and/or seals.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
Documents
Optional Accessories
Vertical Break Away Fittings, Control Float 240V, Pre-Packaged Basin Assemblies, Direct Control Floats, Cast Iron Ball Check Valve, Control Panel, Single Phase, PVC Ball Check Valve, Control Panel, Three Phase, Simplex, Lifting Rope, Control Panel, Three Phase, Duplex, Swing Check Valve, Control Panel, Simplex, 600 VAC, Fiberglass Basin, Control Panel, Duplex, Alternating, 600 VAC, Flexible Discharge Couplings. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
