Product Description
Barnes NGV5072 Grinder Pump - 5 HP, 208/230V
The Barnes NGV5072 is a 5 HP submersible grinder pump from the Blade / NGV line by Crane Pumps & Systems, 208 & 230 volts/phase. Discharge: Vertical 2" NPT. Part number 141343N. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number - Voltage | NGV5072 - 208 |
|---|---|
| Part Number | 141343N |
| Horsepower | 5 |
| Voltage | 208 |
| Phase | 1 |
| Hz | 60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | E |
| Full Load Amps | 34.1 |
| Service Factor | 1 |
| Locked Rotor Amps | 113.2 |
| Driver Frame | 18 |
| Cord Part Number | 125498 |
| Cord Size | 8/4 - 18/4 |
| Cord O.D. | 1.12 ± 0.02 |
| Voltage / Phase | 208 |
| Available Voltages | 208, 230 |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller dia in. (mm) |
|---|---|
| 7.5 | 6.25 (159) |
| 5 | 5.25 (133) |
| 3 | 4.50 (114) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | Vertical 2" NPT |
|---|---|
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 12 Vane vortex, with pump out vanes on back side. Dynamically balanced, ISO G6.3 |
| Shredding Ring | Hardened 440C stainless steel, Rockwell® C-55 |
| Cutter | Hardened 440C Stainless Steel, Rockwell® C-55 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Axalta™ Corlar® Epoxy, two coats |
| Seal | Design:Tandem mechanical, oil filled reservoir |
| Cord Entry | Custom molded, quick connected for sealing and strain relief |
| Power Cord | CSA certified submersible power cable 2000V - ordered separately |
| Upper Bearing | Design:Single row, ball |
| Lower Bearing | Design:Double row, ball |
| Motor | Design: NEMA B Three phase torque curve Oil-filled squirrel cage induction Inverter duty rated per NEMA MG1 |
| Single Phase | Requires overload protection to be included in control panel. Requires start components to be included in panel. Provided with pump |
| Three Phase | Requires overload protection to be included in control panel |
| Moisture Sensors | Normally open (N/O), Requires relay in control panel |
| Temperature Sensor | Normally closed (N/C) To be wired in series with control circuit |
Notes
- Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor.
- ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
- ▲ Cord sold separately.
- Single Phase pumps require start components to be included in panel. Provided with pump.
Documents
Optional Accessories
STEALTH Control Panel, Intermediate Rail Supports for Vertical Break Away Fitting, C-Channel Guide Rail System, Lifting Rope, Pump Monitor Relay, Lifting Chain, Vertical Break Away Fittings, Lifting Cable, C-Channel Moveable Fitting, Leg Kit, Videos. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Grinder Pumps
Series Blade / NGV
Model NGV5072
Part Number 141343N
Horsepower 5 HP
Voltage / Phase 208, 230
Hz 60
RPM 3450
Full Load Amps 34.1
Driver Frame 18
Discharge Vertical 2" NPT
