Product Description
Barnes EHV412A Effluent Pump - 0.5 HP, 115V 1-Phase
The Barnes EHV412A is a 0.5 HP submersible effluent pump from the EHV412 - 0.5 HP line by Crane Pumps & Systems, 115/1 volts/phase. 3/4" Spherical Solids Handling - Manual & Automatic. Discharge: 2” NPT, Female, vertical. Part number 103542. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | EHV412A |
|---|---|
| Part Number | 103542 |
| Horsepower | 0.5 |
| Voltage / Phase | 115/1 |
| Hz | 60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | H |
| Full Load Amps | 6.4 |
| Locked Rotor Amps | 19.6 |
| Cord Length | 20 ft. (6m) |
| Cord Size | 14/3 |
| Cord Type | SJTOW |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia mm (in.) |
|---|---|
| .5 | 87 (3.44) |
Dimensions
All dimensions are in inches (mm).
EHV412A, EHV412, EHV412AT
Specifications
| Cord Entry | 20 ft. (6m) Cord with plug and pressure gromment for sealing and strain relief |
|---|---|
| Discharge | 2” NPT, Female, vertical |
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Impeller | Design: Multi-Vane, Vortex Material: Cast Iron |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series Stainless Steel |
| Paint | Air Dry Enamel |
| Seal | Design: Single mechanical, oil filled reservoir Material: Carbon/ceramic/Buna-N Hardware: 300 Series stainless |
| Upper Bearing | Single Row, Ball, Oil lubricated |
| Lower Bearing | Single Row, Ball, Oil lubricated |
| Motor | Design: Oil Filled Insulation: Class B |
| Single Phase | Permanent Split Capacitor (PSC) |
| Three Phase | 200-240/480 is Tri-voltage. 600V. Requires overload protection to be included in control panel |
| Level Control | EHV412: None EHV412A: Wide angle, mechanical, 20 ft (6m) cord pipe mounted EHV412VF: Vertical float, PVC, snap action EHV412AT: Wide angle, mechanical, 20 ft (6m) cord pump mounted |
Notes
- Pump may be operated “dry” for extended periods without damage to motor and/or seals.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
Documents
Optional Accessories
Vertical Break Away Fittings, Flexible Discharge Couplings, Cast Iron Ball Check Valve, Direct Control Floats, PVC Ball Check Valve, Control Panel, Single Phase, Lifting Rope, Fiberglass Basin, Swing Check Valve, Control Panel, Three Phase, Duplex. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Effluent Pumps
Series EHV412 - 0.5 HP
Model EHV412A
Part Number 103542
Horsepower 0.5 HP
Voltage / Phase 115/1
Hz 60
RPM 3450
Full Load Amps 6.4
Discharge 2” NPT, Female, vertical
