Product Description
Barnes EH522HT Effluent Pump - 0.5 HP, 240V 1-Phase
The Barnes EH522HT is a 0.5 HP submersible effluent pump from the EH-HT line by Crane Pumps & Systems, 240/1 volts/phase. 3/4" Spherical Solids Handling - High Temperature, Single Seal. Discharge: 2” NPT, Female, vertical. Part number 105085. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | EH522HT |
|---|---|
| Part Number | 105085 |
| Horsepower | 0.5 |
| Voltage / Phase | 240/1 |
| Hz | 60 |
| RPM (Nominal) | 3450 |
| NEMA Start Code | K |
| Full Load Amps | 5.3 |
| Locked Rotor Amps | 18.5 |
| Cord Size | 14/3 |
| Cord Type | SOW |
| Cord O.D Inch (Mm) | 0.530 (13.5) |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia mm (in.) |
|---|---|
| 1.5 - 3 Phase | 121 (4.75) |
| 1.5 - 1 Phase | 114 (4.50) |
| .5 | 89 (3.50) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Liquid Temperature | 200°F (93°C) Continuous |
|---|---|
| Seal | Design: Single mechanical Material: Carbon/ceramic/Buna-N Hardware: 300 Series stainless |
| Motor | Design: NEMA L -Single phase, NEMA B -three phase torque curve, oil filled, squirrel cage induction Insulation: Class f |
| Discharge | 2” NPT, Female, vertical |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 3 Vane, open, with pump out vanes on back side. Dynamically balanced, ISO G6.3 Material: Cast Iron ASTM A-48, Class 30 |
| Cord Entry | 20 ft. (6m) Cord with plug on 120 volt & .5HP, 240 volt, 1 phase. Quick connect, custom molded for sealing and strain relief |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series Stainless Steel |
| Paint | Air Dry Enamel |
| Upper Bearing | Single Row, Ball, Oil lubricated |
| Lower Bearing | Single Row, Ball, Oil lubricated |
| Three Phase | 200-240/480 is Tri-voltage. 600V. Requires overload protection to be included in control panel |
| Single Phase | .5HP 120 Volt: Capacitor start, includes overload protection in motor .5HP 240 Volt: Capacitor start, induction run Includes overload protection in motor 1.5HP: Permanent split capacitor (PSC) includes overload protection in motor |
Notes
- Pump may be operated “dry” for extended periods without damage to motor and/or seals.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
- Must use a high temperature wide angle level control in high temperature applications.
Documents
Optional Accessories
High Temperature Level Controls. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Effluent Pumps
Series EH-HT
Model EH522HT
Part Number 105085
Horsepower 0.5 HP
Voltage / Phase 240/1
Hz 60
RPM 3450
Full Load Amps 5.3
Discharge 2” NPT, Female, vertical
