Product Description
Barnes E36 Sensing Package
Barnes E36 Sensing Package from Crane Pumps & Systems. Relay. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Dimensions
All dimensions are in inches (mm).
Specifications
| Included In Package | Winding Temperature Monitoring: Measured via an embedded PT100 RTD in the motor windings, giving analog temperature. Bearing Temperature Monitoring: Measured via a PT1000 RTD affixed to the Upper and Lower Bearings, providing direct analog temperatures. Vibration Monitoring: Measured via a transducer, mounted in the top cavity of the motor, providing monitoring of the overall pump health. Protection Relay: Communicates between the pump sensors and control system via an integrated Modbus interface. The relay measures supply voltage and current via included current transformer, and is suitable for use with variable frequency drives. Includes configurable thresholds for warnings and alarms on bearing temperatures and vibration monitors. Can be used in non-Modbus applications, using dry contacts for warnings and alarms. This relay is also used to monitor the winding thermostat and moisture sensor. |
|---|---|
| Input Power | 100-240 VAC, 50/60 Hz |
| Operating Temperature | -22 to 158°F (-30 to 70°C) |
| Weight | 11.1 oz (315g) |
| Maximum Altitude | 6,562 ft (2,000m) |
| Modbus Protocol | RTU (Two Wire) |
| Dry Contact Rating | 240 VAC, 2.5 A |
| Ingress Protection | P20 |
Notes
- When ordering an E36 pump with a sensing package, a separate sensor cord is necessary. Power and Sensor cords are available in kits or separately. Refer to the pump catalog or manual for the correct cord kit part number.
Documents
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Accessories
Series E36 Sensing Package
Model E36 Sensing Package
Part Number Order by model number
