null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Barnes 8SCTM25098 Chopper Pump - 25 HP, 208V 3-Phase

Barnes

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
8SCTM25098-208-3
Genuine Barnes · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Barnes
Product Line:
Chopper Pumps
Series:
Submersible Motors / 8SCTM
Model:
8SCTM25098
Part Number:
Order by model number
Horsepower:
25 HP
Voltage / Phase:
208/3
Hz:
60
RPM:
870
Full Load Amps:
82.3
Driver Frame:
28
Discharge:
8", 125 lb. Horizontal flange slotted to accommodate 200mm ISO flanges

Barnes 8SCTM25098 Chopper Pump - 25 HP, 208V 3-Phase

The Barnes 8SCTM25098 is a 25 HP submersible chopper pump from the Submersible Motors / 8SCTM line by Crane Pumps & Systems, 208/3 volts/phase. Discharge: 8", 125 lb. Horizontal flange slotted to accommodate 200mm ISO flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.

Model Data

Pump Model Number - Voltage/Phase8SCTM25098 - 208/3
Driver Frame28
Voltage / Phase208/3
Hz60
RPM870
NEMA Start CodeH
Full Load Amps82.3
Service Factor1.2
Service Factor Amps98.8
Locked Rotor Amps400.0
Cord Part Number138319A
Cord Size2/4 - 18/4
Weight (lbs)1180

Performance Curve

Barnes 8SCTM25098 performance curve

Barnes 8SCTM25098 performance curve

Standard Impeller Sizes

Pump HPImpeller Dia mm (in.)
40370 (14.57)
30360 (14.17)
25345 (13.58)
20320 (12.60)
15295 (11.61)
10260 (10.24)
7.5* Select impeller diameter when ordering

Dimensions

All dimensions are in inches (mm).

Barnes 8SCTM25098 dimensions

Specifications

Discharge8", 125 lb. Horizontal flange slotted to accommodate 200mm ISO flanges
Liquid Temperature104°F (40°C) Continuous
VoluteCast iron ASTM A-48, Class 30
Striker Plate440C Stainless steel heat treated to 53-60 HRC hole pattern to accommodate 10" 125 # flange
Wear RingC954 Lead-Free Bronze
Speed870 RPM OR 1150 RPM
ImpellerDesign: Enclosed Tri-Vane, with pump out vanes on back side. Dynamically balanced ISO G6.3
Material: Ductile iron ASTM A-536, 65-45-12
Slicing Blade440C Stainless steel heat treated to 53-60 HRC
Shaft416 Stainless steel
O-RingsBuna-N
Hardware & Lifting Bail300 Series stainless steel
PaintAxalta™ Corlar® Epoxy, two coats
SubmergenceMax Depth 66ft (20m)
Cord EntryRigid quick change epoxy-potted housing (28 & 32 FRAME ONLY)
Power CordCSA certified submersible power cable 2000V - ordered separately
Motor HousingCast iron ASTM A-48, Class 30
Seal PlateDuctile Iron ASTM A-536, 65-45-12 (28 FRAME ONLY)
SealDesign: Tandem mechanical, oil filled reservoir
Material:
- Inboard: Carbon rotating face, Ceramic stationary face
- Outboard: Silicon carbide rotating face, silicon carbide stationary face
- Elastomer: Buna-N
- Hardware: 300 Series stainless steel
Upper BearingDesign: Single row, ball, oil lubricated
Load: Radial
Lower BearingDesign: Double row, ball, oil lubricated
Load: Radial & thrust
MotorDesign: NEMA B - Three Phase Torque Curve Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1
Insulation: Class H Varnish & Magnet Wire
Three PhaseRequires overload protection to be included in control panel
Moisture SensorNormally open (N/O), requires relay in control panel
Temperature SensorThree normally closed (N/C). To be wired in series with control circuit
Optional EquipmentWhite iron impeller, seal material, impeller trims, cord length
MarkingsCSA

Notes

  • Moisture and Temperature sensor leads are integral to power cord.
  • Pump rated for operation at ± 10% voltage at motor.
  • ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
  • ▲ Cord sold separately.
  • * Select impeller diameter when ordering.

Documents

Optional Accessories

BAF, Cable Rack for Level Control, Intermediate Rail Supports, Conditioning Stand, Flygt Adapter, Lifting Chain, Flygt MiniCAS Adapter, Control Float (Standard Series Only), Pump Monitor Relay, Control Float (Explosion Proof Series Only), Videos. Ask us about matching accessories for this pump.

Call for pricing (416) 236-2338 or email sales@bramhambros.com