null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Barnes 6SCMN10056 Chopper Pump - 10 HP, 575V 3-Phase

Barnes

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
6SCMN10056-575-3
Genuine Barnes · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Barnes
Product Line:
Chopper Pumps
Series:
Submersible Motors / 6SCMN
Model:
6SCMN10056
Part Number:
Order by model number
Horsepower:
10 HP
Voltage / Phase:
575/3
Hz:
60
RPM:
1150
Full Load Amps:
12.1
Driver Frame:
21
Discharge:
6", 125 lb. Horizontal flange slotted to accommodate 150mm ISO flanges

Barnes 6SCMN10056 Chopper Pump - 10 HP, 575V 3-Phase

The Barnes 6SCMN10056 is a 10 HP submersible chopper pump from the Submersible Motors / 6SCMN line by Crane Pumps & Systems, 575/3 volts/phase. Discharge: 6", 125 lb. Horizontal flange slotted to accommodate 150mm ISO flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.

Model Data

Pump Model Number - Voltage/Phase6SCMN10056 - 575/3
Driver Frame21
Voltage / Phase575/3
Hz60
RPM1150
NEMA Start CodeF
Full Load Amps12.1
Service Factor1.2
Service Factor Amps14.3
Locked Rotor Amps55
Cord Part Number125497
Cord Size12/4 - 18/4
Weight (lbs)621

Performance Curve

Barnes 6SCMN10056 performance curve

Dimensions

All dimensions are in inches (mm).

Barnes 6SCMN10056 dimensions

Specifications

Discharge6", 125 lb. Horizontal flange slotted to accommodate 150mm ISO flanges
Liquid Temperature104°F (40°C) Continuous
VoluteCast iron ASTM A-48, Class 30
Striker Plate440C Stainless steel heat treated to 53-60 HRC hole pattern to accommodate 6" 125# flange
Wear RingC954 Lead-Free Bronze
Speed1150 RPM
ImpellerDesign: Enclosed Mono-Vane, with Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3.
Material: Ductile Iron ASTM A-536, 65-45-12
Slicing Blade440C Stainless steel heat treated to 53-60 HRC
Shaft416 Stainless steel
O-RingsBuna-N
Hardware & Lifting Bail300 Series stainless steel
PaintAxalta™ Corlar® Epoxy, two coats
SubmergenceMax Depth 66ft (20m)
Cord EntryCustom molded, quick connected for sealing and strain relief (18 & 21 Frame ONLY)
Power CordCSA certified submersible power cable 2000V - ordered separately
Motor HousingCast iron ASTM A-48, Class 30
Seal PlateCast iron ASTM A-48, Class 30
SealDesign: Tandem mechanical, oil filled reservoir
Material:
- Inboard: Carbon rotating face, Ceramic stationary face
- Outboard: Silicon carbide rotating face, silicon carbide stationary face
- Elastomer: Buna-N
- Hardware: 300 Series stainless steel
Upper BearingDesign: Single row, ball, oil lubricated
Load: Radial
Lower BearingDesign: Double row, ball, oil lubricated
Load: Radial & thrust
MotorDesign: NEMA B - Three Phase Torque Curve Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1
Insulation: Class H Varnish & Magnet Wire
Three PhaseRequires overload protection to be included in control panel
Moisture SensorNormally open (N/O), requires relay in control panel
Temperature SensorThree normally closed (N/C). To be wired in series with control circuit
Optional EquipmentWhite iron impeller, seal material, impeller trims, cord length
MarkingsCSA

Notes

  • Moisture and Temperature sensor leads are integral to power cord.
  • Pump rated for operation at ± 10% voltage at motor.
  • ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
  • ▲ Cord sold separately.
  • * Select impeller diameter when ordering.

Documents

Optional Accessories

BAF, Wedge Adapter, Intermediate Rail Supports, Cable Rack for Level Control, Flygt Adapter, Ball Check Valve, Flygt MiniCAS Adapter, Conditioning Stand, Pump Monitor Relay, Lifting Chain, Control Float (Standard Series Only), Control Float (Explosion Proof Series Only), Videos. Ask us about matching accessories for this pump.

Call for pricing (416) 236-2338 or email sales@bramhambros.com