Product Description
Barnes 4SHVB75N4 Solids Handling Pump - 7.5 HP, 460V 3-Phase
The Barnes 4SHVB75N4 is a 7.5 HP submersible solids handling pump from the Submersible Motors / SH Series / 4SHVB line by Crane Pumps & Systems, 460/3 volts/phase. 3" Spherical Solids Handling. Discharge: 4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Pump Model Number - Voltage/Phase | 4SHVB75N4 - 460/3 |
|---|---|
| Driver Frame | 18 |
| Voltage / Phase | 460/3 |
| Hz | 60 |
| RPM | 1750 |
| NEMA Start Code | H |
| Full Load Amps | 11.9 |
| Service Factor | 1.2 |
| Service Factor Amps | 13.6 |
| Locked Rotor Amps | 61.8 |
| Cord Part Number | 125497 |
| Cord Size | 12/4 - 18/4 |
| Weight (lbs) | 219 |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia mm (in.) |
|---|---|
| 15 | 185 (7.28) |
| 10 | 180 (7.09) |
| 7.5 | 165 (6.50) |
| 5 | 145 (5.71) |
| 3 | 130 (5.12) |
| 2 | 120 (4.72) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | 4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges |
|---|---|
| Speed | 1750 RPM OR 3450 RPM |
| Impeller | Design: Vortex, with pump out vanes on back side. Dynamically balanced ISO G6.3 Material: Ductile iron ASTM A-536, 65-45-12 |
| Cord Entry | Custom molded, quick connected for sealing and strain relief (18 & 21 Frame ONLY) |
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, Class 30 |
| Motor Housing | Cast iron ASTM A-48, Class 30 |
| Seal Plate | Cast iron ASTM A-48, Class 30 |
| Shaft | 416 Stainless steel |
| "O" Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Lifting Bail | 300 Series stainless steel |
| Paint | Axalta™ Corlar® Epoxy, two coats |
| Seal | Design: Tandem mechanical, oil filled reservoir Material: - Inboard: Carbon rotating face, Ceramic stationary face - Outboard: Silicon carbide rotating face, silicon carbide stationary face - Elastomer: Buna-N - Hardware: 300 Series stainless steel |
| Power Cord | CSA certified submersible power cable 2000V - ordered separately |
| Upper Bearing | Design: Single row, ball, oil lubricated Load: Radial |
| Lower Bearing | Design: Double row, ball, oil lubricated Load: Radial & thrust |
| Motor | Design: Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation: Class H varnish & magnet wire |
| Three Phase | Requires overload protection to be included in control panel |
| Single Phase | Requires overload protection to be included in control panel. Start components are provided with pump (18 Frame only). Overload protection not included. |
| Moisture Sensor | Normally open (N/O), requires relay in control panel |
| Temperature Sensor | Three normally closed (N/C). To be wired in series with control circuit |
| Optional Equipment | White iron impeller, seal material, impeller trims, cord length |
| Markings | CSA, CE |
| Submergence | Max depth 66ft (20m) |
Notes
- Moisture and Temperature sensor leads are integral to power cord.
- Pump rated for operation at ± 10% voltage at motor.
- ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
- ▲ Cord sold separately.
- * Select impeller diameter when ordering.
Documents
Optional Accessories
BAF, Close Adapter, Intermediate Rail Supports, Cable Rack for Level Controls, Flygt Adapter, Flygt MiniCAS Adapter, Pump Monitor Relay, Leg Kit, Ball Check Valve, Control Float (Standard Series Only), Lifting Chain, Control Float (Explosion Proof Series Only), Wedge Adapter, Videos. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
