null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Barnes 4SHMB30044 Solids Handling Pump - 30 HP, 460V 3-Phase

Barnes

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
4SHMB30044-460-3
Genuine Barnes · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Barnes
Product Line:
Solids Handling Pumps
Series:
SH Series / 4SHMB
Model:
4SHMB30044
Part Number:
Order by model number
Horsepower:
30 HP
Voltage / Phase:
460/3
Hz:
60
RPM:
1750
Full Load Amps:
38.9
Driver Frame:
21
Discharge:
4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges

Barnes 4SHMB30044 Solids Handling Pump - 30 HP, 460V 3-Phase

The Barnes 4SHMB30044 is a 30 HP submersible solids handling pump from the Submersible Motors / SH Series / 4SHMB line by Crane Pumps & Systems, 460/3 volts/phase. 3" Spherical Solids Handling. Discharge: 4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.

Model Data

Pump Model Number - Voltage/Phase4SHMB30044 - 460/3
Driver Frame21
Voltage / Phase460/3
Hz60
RPM1750
NEMA Start CodeF
Full Load Amps38.9
Service Factor1.2
Service Factor Amps45.9
Locked Rotor Amps191.9
Cord Part Number125499
Cord Size8/4 - 18/4
Weight (lbs)461

Performance Curve

Barnes 4SHMB30044 performance curve

Standard Impeller Sizes

Pump HPImpeller Dia mm (in.)
50320 (12.60)
40300 (11.81)
30275 (10.83)
25260 (10.24)
20240 (9.45)
15220 (8.66)

Dimensions

All dimensions are in inches (mm).

Barnes 4SHMB30044 dimensions
21 Frame

Specifications

Discharge4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges
Speed1750 RPM
Wear RingC954 Lead-Free Bronze
ImpellerDesign: Enclosed Mono-Vane, with pump out vanes on back side. Dynamically balanced ISO G6.3.
Material: Ductile iron ASTM A-536, 65-45-12
Cord EntryRigid quick change epoxy-potted housing (28 & 32 FRAME ONLY)
Custom molded, quick connected for sealing and strain relief (18 & 21 Frame ONLY)
Liquid Temperature104°F (40°C) Continuous
VoluteCast iron ASTM A-48, Class 30
Motor HousingCast iron ASTM A-48, Class 30
Seal PlateCast iron ASTM A-48, Class 30
Ductile Iron ASTM A-536, 65-45-12 (28 FRAME ONLY)
Shaft416 Stainless steel
"O" RingsBuna-N
Hardware300 Series stainless steel
Lifting Bail300 Series stainless steel
PaintAxalta™ Corlar® Epoxy, two coats
SealDesign: Tandem mechanical, oil filled reservoir
Material:
- Inboard: Carbon rotating face, Ceramic stationary face
- Outboard: Silicon carbide rotating face, silicon carbide stationary face
- Elastomer: Buna-N
- Hardware: 300 Series stainless steel
Power CordCSA certified submersible power cable 2000V - ordered separately
Upper BearingDesign: Single row, ball, oil lubricated
Load: Radial
Lower BearingDesign: Double row, ball, oil lubricated
Load: Radial & thrust
MotorDesign: Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1
Insulation: Class H varnish & magnet wire
Three PhaseRequires overload protection to be included in control panel
Moisture SensorNormally open (N/O), requires relay in control panel
Temperature SensorThree normally closed (N/C). To be wired in series with control circuit
Optional EquipmentWhite iron impeller, seal material, impeller trims, cord length
MarkingsCSA, CE
SubmergenceMax depth 66ft (20m)

Notes

  • Moisture and Temperature sensor leads are integral to power cord.
  • Pump rated for operation at ± 10% voltage at motor.
  • ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
  • ▲ Cord sold separately.
  • * Select impeller diameter when ordering.

Documents

Optional Accessories

BAF, Close Adapter, Intermediate Rail Supports, Cable Rack for Level Controls, Flygt Adapter, Flygt MiniCAS Adapter, Pump Monitor Relay, Leg Kit, Ball Check Valve, Control Float (Standard Series Only), Lifting Chain, Control Float (Explosion Proof Series Only), Wedge Adapter, Videos. Ask us about matching accessories for this pump.

Call for pricing (416) 236-2338 or email sales@bramhambros.com