Product Description
Barnes 4SE2894L Solids Handling Pump - 2.8 HP, 200-230V 3-Phase
The Barnes 4SE2894L is a 2.8 HP submersible solids handling pump from the Submersible Motors / 4SE Series / 4SE-L line by Crane Pumps & Systems, 200-230/3 volts/phase. 3" Spherical Solids Handling. Discharge: 4" 125lb., Horizontal flange. Part number 133141. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | 4SE2894L |
|---|---|
| Part Number | 133141 |
| Horsepower | 2.8 |
| Voltage / Phase | 200-230/3 |
| Hz | 60 |
| RPM (Nominal) | 1750 |
| NEMA Start Code | D/G |
| Insulation Class | B |
| Full Load Amps | 9.2/8.0 |
| Locked Rotor Amps | 35.9/42.7 |
| Cord Size | 12/4 |
| Cord Type | SOOW/SOW |
| Cord O.D Inch (Mm) | .68 (17.4) |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia in. (mm) |
|---|---|
| 1.9 | 7.00 (178) |
| 2.8 | 7.50 (191) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | 4" 125lb., Horizontal flange |
|---|---|
| Speed | 1150 OR 1750 RPM |
| Impeller | Design: 2 Vane, semi-open with pump out vanes on back side, dynamically balanced, ISO G6.3 Material: Cast iron ASTM A-48, class 30 |
| Cord Entry | 30 ft. (9.1 m) Cord. Quick connect custom molded for sealing and strain relief |
| Motor | Design: NEMA L- single phase, NEMA B - three phase torque curve, oil filled, squirrel cage induction Winding: Class B, class H rated magnet wire, class F on selected models Service Factor: 1.15 |
| Seal | Design: Double mechanical, oil filled pressure equalized reservoir Material: Carbon/Ceramic/Buna-N |
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Air dry enamel (epoxy optional) |
| Upper Bearing | Upper Bearing: Design: Single row, ball, oil lubricated Load: Radial |
| Diaphragm | Buna-N |
| Single Phase | Permanent Split Capacitor (PSC) includes overload protection in motor |
| Three Phase | 200-240/480 is Tri Voltage motor. 600V Requires Overload Protection to be included in Control Panel |
| Moisture Sensor | Normally open (N/O), requires relay in control panel |
| Temperature Sensor | Normally Closed (N/C), Requires relay in control panel. For three phase units ONLY |
Documents
Optional Accessories
Horizontal Break Away Fittings, Intermediate Rail Supports, Capacitor/Relay Packs, BAF-4 Movable Fitting, Pump Monitor Relay, BAF-E4 Movable Fitting, Close Adapter, Cable Rack for Level Controls, Flygt Adapter, Ball Check Valve, Lifting Chain, Control Floats. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Solids Handling Pumps
Series 4SE Series / 4SE-L
Model 4SE2894L
Part Number 133141
Horsepower 2.8 HP
Voltage / Phase 200-230/3
Hz 60
RPM 1750
Full Load Amps 9.2/8.0
Discharge 4" 125lb., Horizontal flange
