Product Description
Barnes 4SE1474L Solids Handling Pump - 1.4 HP, 200-240V 1-Phase
The Barnes 4SE1474L is a 1.4 HP submersible solids handling pump from the Submersible Motors / 4SE Series / 4SE-L line by Crane Pumps & Systems, 200-240/1 volts/phase. 2" Spherical Solids Handling. Discharge: 3" & 4" 125lb., Horizontal flange. Part number 105024. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | 4SE1474L |
|---|---|
| Part Number | 105024 |
| Horsepower | 1.4 |
| Voltage / Phase | 200-240/1 |
| Hz | 60 |
| RPM (Nominal) | 1750 |
| NEMA Start Code | A/D |
| Insulation Class | F |
| Full Load Amps | 7.4/7.0 |
| Locked Rotor Amps | 21.5/25.8 |
| Cord Size | 14/3 |
| Cord Type | SOW |
| Cord O.D Inch (Mm) | 0.530 (13.5) |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia in. (mm) |
|---|---|
| 0.9 | 5.25 (133) |
| 1.4 | 5.62 (143) |
| 1.9 | 6.00 (152) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | 3" & 4" 125lb., Horizontal flange |
|---|---|
| Speed | 1750 RPM (Nominal) |
| Impeller | Design: 2 Vane, open with pump out vanes on back side, dynamically balanced, ISO G6.3 Material: Cast iron ASTM A-48, class 30 |
| Cord Entry | 30 ft. (9.1m) Quick disconnect cord with plug on 120Volt, custom molded for sealing and strain relief |
| Motor | Design: NEMA L- single phase, NEMA B - three phase torque curve, oil filled, squirrel cage induction Insulation: Class B |
| Seal | Design: Single mechanical Material: Carbon/Ceramic/Buna-N Hardware - 300 series stainless |
| Liquid Temperature | 104°F (40°C) Continuous |
| Volute | Cast iron ASTM A-48, class 30 |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Air dry enamel (epoxy optional) |
| Upper Bearing | Upper Bearing: Design: Single row, ball, oil lubricated Load: Radial |
| Single Phase | Permanent Split Capacitor (PSC) includes overload protection in motor |
| Three Phase | 200-240/480 is Tri Voltage motor. 600V Requires Overload Protection to be included in Control Panel |
Notes
- OPTIONAL - Temperature sensor cord for 3 phase models is 14/3 SOW, 0.530 (13.5mm) O.D.
- Pump may be operated “dry” for extended periods without damage to motor and/or seals.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
Documents
Optional Accessories
Horizontal Break Away Fittings, Intermediate Rail Supports, Capacitor/Relay Packs, BAF-4 Movable Fitting, Pump Monitor Relay, BAF-E4 Movable Fitting, Close Adapter, Cable Rack for Level Controls, Flygt Adapter, Ball Check Valve, Lifting Chain, Control Floats. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Solids Handling Pumps
Series 4SE Series / 4SE-L
Model 4SE1474L
Part Number 105024
Horsepower 1.4 HP
Voltage / Phase 200-240/1
Hz 60
RPM 1750
Full Load Amps 7.4/7.0
Discharge 3" & 4" 125lb., Horizontal flange
