null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Barnes 4SCDI25044 Chopper Pump - 25 HP, 460V 3-Phase

Barnes

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
4SCDI25044-460-3
Genuine Barnes · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Barnes
Product Line:
Chopper Pumps
Series:
Submersible Motors / 4SCDI
Model:
4SCDI25044
Part Number:
Order by model number
Horsepower:
25 HP
Voltage / Phase:
460/3
Hz:
60
RPM:
1750
Full Load Amps:
33.2
Driver Frame:
21
Discharge:
4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges

Barnes 4SCDI25044 Chopper Pump - 25 HP, 460V 3-Phase

The Barnes 4SCDI25044 is a 25 HP submersible chopper pump from the Submersible Motors / 4SCDI line by Crane Pumps & Systems, 460/3 volts/phase. Discharge: 4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.

Model Data

Pump Model Number - Voltage/Phase4SCDI25044 - 460/3
Driver Frame21
Voltage / Phase460/3
Hz60
RPM1750
NEMA Start CodeG
Full Load Amps33.2
Service Factor1.2
Service Factor Amps38.9
Locked Rotor Amps191.9
Cord Part Number125499
Cord Size8/4 - 18/4
Weight (lbs)577

Performance Curve

Barnes 4SCDI25044 performance curve

Barnes 4SCDI25044 performance curve

Standard Impeller Sizes

Pump HPImpeller Dia mm (in.)
40370 (14.57)
30360 (14.17)
25350 (13.78)
20330 (13.00)
15300 (11.81)
10260 (10.24)
7.5235 (9.25)

Dimensions

All dimensions are in inches (mm).

Barnes 4SCDI25044 dimensions
21 Frame

Specifications

Discharge4”, 125 lb. Horizontal flange slotted to accommodate 100mm ISO flanges
Liquid Temperature104°F (40°C) Continuous
VoluteCast iron ASTM A-48, Class 30
Striker Plate440C stainless steel heat treated to 53-60 HRC hole pattern to accommodate 4” 125 # flange
Wear RingC954 Lead-Free Bronze
Speed1150 RPM OR 1750 RPM
ImpellerDesign: Enclosed Dual-Vane, with pump out vanes on back side. Dynamically balanced ISO G6.3.
Material: Ductile iron ASTM A-536, 65-45-12
Slicing Blade440C Stainless steel heat treated to 53-60 HRC
Shaft416 Stainless steel
O-RingsBuna-N
Hardware & Lifting Bail300 Series stainless steel
PaintAxalta™ Corlar® Epoxy, two coats
SubmergenceMax Depth 66ft (20m)
Cord EntryCustom molded, quick connected for sealing and strain relief (18 & 21 Frame ONLY)
Rigid quick change epoxy-potted housing (28 & 32 FRAME ONLY)
Power CordCSA certified submersible power cable 2000V - ordered separately
Motor HousingCast iron ASTM A-48, Class 30
Seal PlateCast iron ASTM A-48, Class 30
Ductile Iron ASTM A-536, 65-45-12 (28 FRAME ONLY)
SealDesign: Tandem mechanical, oil filled reservoir
Material:
- Inboard: Carbon rotating face, Ceramic stationary face
- Outboard: Silicon carbide rotating face, silicon carbide stationary face
- Elastomer: Buna-N
- Hardware: 300 Series stainless steel
Upper BearingDesign: Single row, ball, oil lubricated
Load: Radial
Lower BearingDesign: Double row, ball, oil lubricated
Load: Radial & thrust
MotorDesign: NEMA B - Three Phase Torque Curve Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1
Insulation: Class H Varnish & Magnet Wire
Three PhaseRequires overload protection to be included in control panel
Moisture SensorNormally open (N/O), requires relay in control panel
Temperature SensorThree normally closed (N/C). To be wired in series with control circuit
Optional EquipmentWhite iron impeller, seal material, impeller trims, cord length
MarkingsCSA

Notes

  • Moisture and Temperature sensor leads are integral to power cord.
  • Pump rated for operation at ± 10% voltage at motor.
  • ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
  • ▲ Cord sold separately.
  • * Select impeller diameter when ordering.

Documents

Optional Accessories

BAF, Close Adapter, Intermediate Rail Supports, Wedge Adapter, Flygt Adapter, Cable Rack for Level Control, Flygt MiniCAS Adapter, Conditioning Stand, Pump Monitor Relay, Lifting Chain, Ball Check Valve, Control Float (Explosion Proof Series Only), Control Float (Standard Series Only), Videos. Ask us about matching accessories for this pump.

Call for pricing (416) 236-2338 or email sales@bramhambros.com