null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Barnes 4ESHMEA15066HT6 High Temperature Solids Handling Pump, 208V 3-Phase

Barnes

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
4ESHMEA15066HT6-208-3
Genuine Barnes · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Barnes
Product Line:
Solids Handling Pumps
Series:
High Temperature Motors / 4ESHMEA
Model:
4ESHMEA15066HT6
Part Number:
Order by model number
Voltage / Phase:
208/3
RPM:
1150
Full Load Amps:
40.0
Driver Frame:
E28HT
Discharge:
4”, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges

Barnes 4ESHMEA15066HT6 High Temperature Solids Handling Pump, 208V 3-Phase

The Barnes 4ESHMEA15066HT6 is a submersible solids handling pump from the High Temperature Motors / 4ESHMEA line by Crane Pumps & Systems, 208/3 volts/phase. 3" Spherical Solids Handling. Discharge: 4”, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.

Model Data

Pump Model Number - Voltage/Phase4ESHMEA15066HT6 - 208/3
Driver FrameE28HT
Voltage / Phase208/3
RPM (Nominal)1150
NEMA Start CodeG
Full Load Amps40.0
Locked Rotor Amps250.0
Cord Part Number138317
Cord Size8/4 - 18/4
Power Factor 100% Load84.6
Power Factor 75% Load81.8
Power Factor 50% Load74.9
Motor Efficiency 100% Load91.5
Motor Efficiency 75% Load92.5
Motor Efficiency 50% Load92.6
Weight (lbs)679
Working Pressure (Psi)52

Performance Curve

Barnes 4ESHMEA15066HT6 performance curve

Standard Impeller Sizes

Pump HPImpeller Dia mm (in.)
15320 (12.60)
10**Select impeller diameter when ordering

Dimensions

All dimensions are in inches (mm).

Barnes 4ESHMEA15066HT6 dimensions

Specifications

Discharge4”, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges
Suction125lb ANSI Flange
Speed1150 RPM
Wear RingC954 Lead-Free Bronze
ImpellerDesign: Enclosed Mono-Vane, with Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3.
Material: Ductile Iron ASTM A-536, 65-45-12
Cord TypeRigid Quick Change Epoxy-Potted Housing
Maximum Temperature140°F (60°C) Continuous
VoluteCast Iron ASTM A-48, Class 35B
MotorDesign: NEMA B Three Phase Torque Curve, Air-Filled, Squirrel Cage Induction, Inverter Duty Rated per NEMA MG1
Insulation: Class H
Efficiency: IE3
Voltage: 208, 230, 460 (±10% voltage variation)
Service Factor: 1.15
Shaft416 Stainless steel
Starts Per Hour15 per hour, evenly spread
Cooling SystemClosed loop cooling system
Cooling Jacket:
- E21, E28, and E32 Frame: 300 Series stainless steel
- E36 Frame: Integral cast iron jacket ASTM A-48, Class 35B
VoluteCast iron ASTM A-48, Class 30
O-RingsBuna-N
Hardware300 Series stainless steel
SubmergenceMax depth 66ft (20m)
Motor HousingCast iron ASTM A-48, Class 35B
Seal BracketCast iron ASTM A-48, Class 35B
Lower BearingDesign: Double Row, Ball, Permanently High Temperature Grease Lubricated
Load: Radial & Thrust
Upper BearingDesign: Single Row, Ball, Permanently High Temperature Grease Lubricated
Load: Radial
Bearing Bracket AssemblyCast iron ASTM A-48, Class 35B
Hardware And Lifting Bail300 Series stainless steel
SealDesign: Tandem mechanical
Material:
- Inboard: Carbon rotating face, silicon carbide stationary face
- Outboard: Silicon carbide rotating face, silicon carbide stationary face
- Elastomer: Buna-N
- Hardware: 300 Series stainless steel
Power CordCSA certified submersible power cable - ordered separately
Motor End Coating SystemResicoat® R4 Powder Coat Epoxy
Pump End Coating SystemAxalta Corlar® amidoamine epoxy
Optional EquipmentWhite iron impeller, impeller trims, impeller types, cord length, seal options, certified testing (FOR APPLICATIONS WITH HIGH & LOW PH, SPECIAL COATINGS FOR WET ENDS ARE AVAILABLE UPON REQUEST)
MarkingCSA
Moisture SensorNormally Open (N/O) Float Sensor with Resistor, Located in Seal Chamber, Requires Relay in Control Panel
Temperature SensorThree Phase: Three Normally Closed (N/C) Thermal Sensors, One per Phase, Embedded in Stator Windings, To be wired in series with control circuit.
Overload ProtectionThree Phase: Must be included in control panel

Notes

  • Moisture and Temperature sensor leads are integral to power cord.
  • Pump rated for operation at ± 10% voltage at motor.
  • ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
  • ▲ Cord sold separately.
  • * Tri-voltage pumps (i.e. 208-230/460V) are operable at 208V, but will not meet IE3 efficiency. A true 208V, single voltage pump must be ordered to obtain an IE3 rating
  • NOTE: Envie3 Dry Run Submersible motors tested per CSA C390/IEEE-112. Efficiency levels are comparable to that of motors meeting the IEC60034-30 standard.

Documents

Optional Accessories

Break Away Fitting, Metal Stand, Horizontal Cart System, Flygt Adapter, Level Controls, Fixed Bracket, Cable Rack, Concrete Stand, Leg Kit, Videos. Ask us about matching accessories for this pump.

Call for pricing (416) 236-2338 or email sales@bramhambros.com