Product Description
Barnes 3SE1094DS Sewage Ejector Pump – 1 HP, 200-240V 3-Phase
The Barnes 3SE1094DS (part number 104915) is a 1 HP submersible sewage ejector pump from the 3SE-DS line by Crane Pumps & Systems, rated 200-240V 3-phase at 1750 RPM. 2" Spherical Solids Handling - Double Seal. Discharge: 3” NPT, Female, vertical. Call for pricing (416) 236-2338 or email sales@bramhambros.com.
Model Data
| Model Number | 3SE1094DS |
|---|---|
| Part Number | 104915 |
| Horsepower | 1 |
| Voltage / Phase | 200-240/3 |
| Hz | 60 |
| RPM (Nominal) | 1750 |
| NEMA Start Code | E/H |
| Insulation Class | F |
| Full Load Amps | 5.14/4.9 |
| Locked Rotor Amps | 13.7/15.4 |
| Cord Size | 14/4 |
| Cord Type | SOW |
| Cord O.D. in (mm) | 0.570 (14.5) |
| Weight (lbs) | 95 |
Performance Curve
Standard Impeller Sizes
| Pump HP | Impeller Dia mm (in.) |
|---|---|
| 0.5 | 133 (5.25) |
| 0.75 | 143 (6.62) |
| 1.00 | 152 (6.00) |
Dimensions
All dimensions are in inches (mm).
Specifications
| Discharge | 3” NPT, Female, vertical |
|---|---|
| Speed | 1750 RPM (Nominal) |
| Liquid Temperature | 104°F (40°C) Continuous |
| Motor Housing | Cast iron ASTM A-48, class 30 |
| Impeller | Design: 2 Vane, open, with pump out vanes on back side. Dynamically balanced, ISO G6.3 Material: Cast iron ASTM A-48, class 30 |
| Cord Entry | 15 ft. (5m) Cord with plug on 120 volt & .5HP, 240 volt, 1 phase. Quick connect custom molded for sealing and strain relief |
| Single Phase | Permanent split capacitor (PSC) includes overload protection in motor |
| Three Phase | 200-240/480 is Tri-Voltage. 600V. Requires Overload Protection to be included in control panel |
| Motor | Design:NEMA L -single phase, NEMA B -three phase torque curve, oil filled, squirrel cage induction Insulation:Class B & Class F on selected models |
| Upper Bearing | Design: Single row, ball Lubrication: Oil Load: Radial |
| Lower Bearing | Design: Single row, ball Lubrication: Oil Load: Radial & Thrust |
| Volute | Cast iron ASTM A-48, class 30 |
| Shaft | 416 Stainless steel |
| Square Rings | Buna-N |
| Hardware | 300 Series stainless steel |
| Paint | Air dry enamel |
| Seal Plate | Cast iron ASTM A-48, class 30 |
| Seal Kit P/N | 130176 |
| Service Kit P/N | 130172 |
| Optional Equipment | Seal Material, Impeller Trims, Additional cord, Normally Closed Temperature Sensors with cord for 3 phase pumps (Requires relay in control panel), Normally Open Moisture sensor with cord for DS pumps (Requires relay in control panel) |
Important
- Pump may be operated “dry” for extended periods without damage to motor and/or seals.
- Installations such as decorative fountains or water features provided for visual enjoyment must be installed in accordance with the national electric code ANSI/NFPA 70 and/or the authority having jurisdiction. This pump is not intended for use in swimming pools, recreational water parks, or installations in which human contact with pumped media is a common occurrence.
Documents
Optional Accessories
Vertical Break Away Fitting, Control Panel, Three Phase, Duplex, Control Panel, Single Phase, Control Float, Intrinsically Safe Control Floats, Fiberglass Basin, Pilot Duty Control Floats, Control Panel, Three Phase, Simplex, Ball Check Valve, Cable Rack for Level Controls. Ask us about matching accessories for this pump.
Call for pricing (416) 236-2338 or email sales@bramhambros.com
Product Videos
Custom Field
Brand Barnes
Product Line Sewage Ejector Pumps
Series 3SE-DS
Model 3SE1094DS
Horsepower 1 HP
Voltage / Phase 200-240/3
Hz 60
RPM 1750
Full Load Amps 5.14/4.9
Discharge 3” NPT, Female, vertical
Solids Handling 2" Spherical Solids Handling
Cord 14/4 SOW
Seal Kit P/N 130176
Service Kit P/N 130172
