null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Barnes 3ESHVRA30052 Dry Run Solids Handling Pump - 30 HP, 575V 3-Phase

Barnes

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
3ESHVRA30052-575-3
Genuine Barnes · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Barnes
Product Line:
Solids Handling Pumps
Series:
Dry Run Submersible Motors / 3ESHVRA
Model:
3ESHVRA30052
Part Number:
Order by model number
Horsepower:
30 HP
Voltage / Phase:
575/3
Hz:
60
RPM:
3450
Full Load Amps:
26.8
Driver Frame:
E28
Discharge:
3”, 125 lb. Horizontal flange slotted to accommodate 80mm ISO flanges

Barnes 3ESHVRA30052 Dry Run Solids Handling Pump - 30 HP, 575V 3-Phase

The Barnes 3ESHVRA30052 is a 30 HP submersible solids handling pump from the Dry Run Submersible Motors / 3ESHVRA line by Crane Pumps & Systems, 575/3 volts/phase. 2.625" Spherical Solids Handling. Discharge: 3”, 125 lb. Horizontal flange slotted to accommodate 80mm ISO flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.

Model Data

Pump Model Number - Voltage/Phase3ESHVRA30052 - 575/3
Driver FrameE28
Voltage / Phase575/3
Hz60
RPM (Nominal)3450
NEMA Start CodeG
Full Load Amps26.8
Locked Rotor Amps183.0
Cord Part Number125497
Cord Size12/4 - 18/4
Power Factor 100% Load90.6
Power Factor 75% Load89.9
Power Factor 50% Load86.3
Motor Efficiency 100% Load92.6
Motor Efficiency 75% Load93.7
Motor Efficiency 50% Load93.8
Weight (lbs)638
Working Pressure (Psi)92

Performance Curve

Barnes 3ESHVRA30052 performance curve

Standard Impeller Sizes

Pump HPImpeller Dia mm (in.)
40190 (7.48)
30145 (5.71)
25130 (5.12)
20120 (4.72)
15**Select impeller diameter when ordering

Dimensions

All dimensions are in inches (mm).

Barnes 3ESHVRA30052 dimensions

Specifications

Discharge3”, 125 lb. Horizontal flange slotted to accommodate 80mm ISO flanges
Suction2.625", 125lb ANSI flange
Speed3450 RPM
ImpellerDesign: Vortex, with pump out vanes on back side. Dynamically balanced ISO G6.3
Material: Ductile iron ASTM A-536, 65-45-12
Cord TypeCustom Molded quick connected for sealing and strain relief (E21 & E28 FRAME ONLY)
Maximum Liquid Temperature104°F (40°C) Continuous
MotorDesign: NEMA B three phase torque curve, air-filled, squirrel cage induction, inverter duty rated per NEMA MG1
Insulation: Class H
Efficiency: IE3
Voltage: 208, 230, 460, 575 (±10% voltage variation)
Service Factor: 1.15
Shaft416 Stainless steel
Starts Per HourE21 and E28 Frame: 30 Starts per Hour, evenly spaced
E32 and E36 Frame: 15 Starts per Hour, evenly spaced
Cooling SystemClosed loop cooling system
Cooling Jacket:
- E21, E28, and E32 Frame: 300 Series stainless steel
- E36 Frame: Integral cast iron jacket ASTM A-48, Class 35B
VoluteCast iron ASTM A-48, Class 30
O-RingsBuna-N
Hardware300 Series stainless steel
SubmergenceMax depth 66ft (20m)
Motor HousingCast iron ASTM A-48, Class 35B
Seal BracketCast iron ASTM A-48, Class 35B
Lower BearingDesign: Double Row, Ball, permanently Grease Lubricated
Load: Radial & Thrust
Upper BearingDesign: Single Row, Ball, permanently Grease Lubricated
Load: Radial
Bearing Bracket AssemblyCast iron ASTM A-48, Class 35B
Hardware And Lifting Bail300 Series stainless steel
SealDesign: Tandem mechanical
Material:
- Inboard: Carbon rotating face, silicon carbide stationary face
- Outboard: Silicon carbide rotating face, silicon carbide stationary face
- Elastomer: Buna-N
- Hardware: 300 Series stainless steel
Power CordCSA certified submersible power cable - ordered separately
Motor End Coating SystemResicoat® R4 Powder Coat Epoxy
Pump End Coating SystemAxalta Corlar® amidoamine epoxy
Optional EquipmentWhite iron impeller, impeller trims, impeller types, cord length, seal options, certified testing
MarkingCSA
Moisture SensorNormally Open (N/O) Float Sensor with Resistor, Located in Seal Chamber, Requires Relay in Control Panel
Temperature SensorThree Phase: Three Normally Closed (N/C) Thermal Sensors, One per Phase, Embedded in Stator Windings, To be wired in series with control circuit.
Overload ProtectionThree Phase: Must be included in control panel

Notes

  • Moisture and Temperature sensor leads are integral to power cord.
  • Pump rated for operation at ± 10% voltage at motor.
  • ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
  • ▲ Cord sold separately.
  • * Tri-voltage pumps (i.e. 208-230/460V) are operable at 208V, but will not meet IE3 efficiency. A true 208V, single voltage pump must be ordered to obtain an IE3 rating
  • NOTE: Envie3 Dry Run Submersible motors tested per CSA C390/IEEE-112. Efficiency levels are comparable to that of motors meeting the IEC60034-30 standard.

Documents

Optional Accessories

Break Away Fitting, Level Controls, Cable Rack, Flygt Adapter, Leg Kit, Pump Monitor Relay, Videos. Ask us about matching accessories for this pump.

Call for pricing (416) 236-2338 or email sales@bramhambros.com