null Skip to main content
Authorized dealer for Bell & Gossett, Armstrong, Zoeller, Barnes, Taco, Wilo and more Call a pump expert: (416) 236-2338 sales@bramhambros.com

Barnes 10ESCTB40056 Dry Run Chopper Pump - 40 HP, 575V 3-Phase

Barnes

Call for pricing (416) 236-2338 or email sales@bramhambros.com

Write a Review
SKU:
10ESCTB40056-575-3
Genuine Barnes · authorized dealer
Full manufacturer warranty
Questions? (416) 236-2338
Secure checkout

Specifications

Brand:
Barnes
Product Line:
Chopper Pumps
Series:
Dry Run Submersible Motors / 10ESCTB
Model:
10ESCTB40056
Part Number:
Order by model number
Horsepower:
40 HP
Voltage / Phase:
575/3
Hz:
60
RPM:
1150
Full Load Amps:
37.0
Driver Frame:
E36
Discharge:
10”, 125 lb. Horizontal flange slotted to accommodate 250mm ISO flanges

Barnes 10ESCTB40056 Dry Run Chopper Pump - 40 HP, 575V 3-Phase

The Barnes 10ESCTB40056 is a 40 HP submersible chopper pump from the Dry Run Submersible Motors / 10ESCTB line by Crane Pumps & Systems, 575/3 volts/phase. Discharge: 10”, 125 lb. Horizontal flange slotted to accommodate 250mm ISO flanges. Crane does not publish a separate part number for this configuration, so order by model number. Call for pricing (416) 236-2338 or email sales@bramhambros.com.

Model Data

Pump Model Number - Voltage/Phase10ESCTB40056 - 575/3
Driver FrameE36
Voltage / Phase575/3
RPM (Nominal)1150
Hz60
NEMA Start CodeG
Full Load Amps37.0
Locked Rotor Amps231.0
Cord Part Number138317
Cord Size8/4 - 18/4
Power Factor 100% Load84.8
Power Factor 75% Load82.4
Power Factor 50% Load74.8
Motor Efficiency 100% Load94.6
Motor Efficiency 75% Load95.0
Motor Efficiency 50% Load94.9
Weight (lbs)2040
Working Pressure (Psi)62

Performance Curve

Barnes 10ESCTB40056 performance curve

Standard Impeller Sizes

Pump HPImpeller Dia. mm (in.)
75350 (13.78)
60330 (12.99)
50315 (12.40)
40**Select impeller diameter when ordering

Dimensions

All dimensions are in inches (mm).

Barnes 10ESCTB40056 dimensions

Specifications

Discharge10”, 125 lb. Horizontal flange slotted to accommodate 250mm ISO flanges
Suction12", 125lb ANSI flange
Striker Plate440C Stainless steel heat treated to 53-60 HRC hole pattern to accommodate 12" 125 # Flange
Speed1150 RPM
ImpellerDesign: Enclosed Tri-Vane, with pump out vanes on back side. Dynamically balanced ISO G6.3
Material: Ductile iron ASTM A-536, 65-45-12
Cord EntryRigid quick change epoxy-potted housing (E32 & E36 FRAME ONLY)
Maximum Liquid Temperature104°F (40°C) Continuous
VoluteCast iron ASTM A-48, Class 30
Wear RingC954 Lead-free bronze
Slicing Blade440C Stainless steel heat treated to 53-60 HRC
O-RingsBuna-N
Hardware300 Series stainless steel
MotorDesign: NEMA B three phase torque curve, air-filled, squirrel cage induction, inverter duty rated per NEMA MG1
Insulation: Class H
Efficiency: IE3
Voltage: 208, 230, 460, 575 (±10% voltage variation)
Service Factor: 1.15
Shaft416 Stainless steel
Starts Per HourE21 and E28 Frame: 30 Starts per Hour, evenly spaced
E32 and E36 Frame: 15 Starts per Hour, evenly spaced
Cooling SystemClosed loop cooling system
Cooling Jacket:
- E21, E28, and E32 Frame: 300 Series stainless steel
- E36 Frame: Integral cast iron jacket ASTM A-48, Class 35B
SubmergenceMax depth 66ft (20m)
Motor HousingCast iron ASTM A-48, Class 35B
Seal BracketCast iron ASTM A-48, Class 35B
Lower BearingDesign: Double Row, Ball, permanently Grease Lubricated
Load: Radial & Thrust
Upper BearingDesign: Single Row, Ball, permanently Grease Lubricated
Load: Radial
Bearing Bracket AssemblyUpper Bearing Bracket: Cast Iron ASTM A48, Class 35B
Middle Bearing Bracket: Cast Iron ASTM A48 Class 35B
Lower Bearing Bracket: Ductile Iron, ASTM 536, 65-45-12
Hardware And Lifting Bail300 Series stainless steel
SealDesign: Tandem mechanical
Material:
- Inboard: Carbon rotating face, silicon carbide stationary face
- Outboard: Silicon carbide rotating face, silicon carbide stationary face
- Elastomer: Buna-N
- Hardware: 300 Series stainless steel
Power CordCSA certified submersible power cable - ordered separately
Sensing CableCustom molded quick connect
Motor End Coating SystemResicoat® R4 Powder Coat Epoxy TEST BLUE
Pump End Coating SystemAxalta Corlar® Amidoamine Epoxy
Optional EquipmentWhite iron impeller, impeller trims, impeller types, cord length, seal options, certified testing
MarkingsCSA
Moisture SensorNormally open (N/O) float sensor with resistor, located in seal chamber, requires relay in control panel
Temperature SensorThree phase - Three normally closed (N/C) thermal sensors, one per phase, embedded in stator windings, to be wired in series with control circuit.
Sensing PackageUpper and lower bearing RTD's, upper bearing vibration transducer, stator winding RTD, embedded in winding coil, with a current transformer included in the control panel (E36 FRAME ONLY)
Overload ProtectionThree phase - must be included in the control panel

Notes

  • Moisture and Temperature sensor leads are integral to power cord.
  • Pump rated for operation at ± 10% voltage at motor.
  • ▲ Cord Suffix: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL - 100 Feet.
  • ▲ Cord sold separately.
  • * Tri-voltage pumps (i.e. 208-230/460V) are operable at 208V, but will not meet IE3 efficiency. A true 208V, single voltage pump must be ordered to obtain an IE3 rating.
  • NOTE: Envie3 Dry Run Submersible motors tested per CSA C390/IEEE-112. Efficiency levels are comparable to that of motors meeting the IEC60034-30 standard.

Documents

Optional Accessories

Break Away Fitting, Metal Stand, Flygt Adapter, Level Controls, Conditioning Stand, Concrete Stand, Horizontal Cart System, Fixed Bracket, Cable Rack, Pump Monitor Relay, E36 Sensing Package, Videos. Ask us about matching accessories for this pump.

Call for pricing (416) 236-2338 or email sales@bramhambros.com